HP LaserJet 4

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

An Er/04, Er/05, or Er/06 error message indicates paper is jammed inside the printer. To resolve the issue, find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
An Er/02 error message indicates that the toner cartridge door is open or not closed completely. To resolve the error, open the toner cartridge door, and then close it completely.
An Er/26 error message indicates the printer has experienced a general engine error. To resolve the error, press the Resume button to continue. If the error repeats, turn off the printer, wait for 30 seconds, and turn on the printer. If the problem persists, contact HP Customer Support.
An E5 error occurs when the printer experiences a scanning error. Turn the printer off and on again to resolve a scanning error. If you were not scanning when the error occurred, skip to the Service the printer section at the end of this document.
Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Check for obstructions in the carriage path

Open the cartridge access door to get to the carriage inside the printer. Make sure the carriage is not obstructed by gently sliding the carriage side to side. Look for and remove any obstructions in the carriage path, such as crumpled paper or dislodged labels.

An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.
The Error 0xf1 occurred due to a printer jam when papers are stuck in the printer. First. Check your printer tray if there is any paper stuck in it. Then remove the paper and clean it with a blow dryer or small piece of cloth.
Cause. The error may be caused if the wrong printer is set as the default printer, the printer driver is missing, or if there are conflicts in the device manager.
The system error 24:10 is a critical error in which the printer cannot be used until has been corrected. Turn the printer on in Diagnostic Mode. Turn On the printer holding down Power + Cancel + DOWN buttons until you hear one beep before releasing ALL three keys.
An Er/04, Er/05, or Er/06 error message indicates a paper jam. Find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
It appears when the software was denied access to a location for the purposes of saving, copying, opening, or loading files.
The 58.00. 04 Error occurs when the product experiences a low voltage power supply is when unit malfunctions. Hi, The error msg denotes that “The product has experienced a low voltage power supply unit malfunction.”
The main cause of the issue is the absence of the printer driver software. Driver software that are incompatible with the system and also software that lack updates are other reasons that cause the printer error 5 to occur. Also, driver software for a particular device should be configured after its installation.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
a misprint or misspelling in a text.
Open Settings -> Devices -> Printers and Scanners (or run a quick access URI command: ms-settings:printers ); Select a printer you want to remove and click Remove Device; Confirm the printer removal.
Color Laser Printer or Black & White Laser Printer

As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.

What maintenance does a laser printer need? To keep your printer running at maximum capacity, you need to maintain its working parts. Dust and wipe it down regularly inside and out with a no-lint towel and rubbing alcohol. Turn off your printers regularly, especially when they aren`t in use for a long while.
The F5 E3 alert indicates there is issue with the lid lock. Do not force the lid open, as permanent damage could occur. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid.
This error occurs when the garage door opener detects that the safety sensors are blocked, not aligned or have an issue with the wires.
The F5 E2 alert indicates the washer can`t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.
An E1 or E2 error indicates that the paper size setting does not match the paper size that is loaded.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet 4

HP PSC 1510 copying problems
ANSWER : my hp photocopy is not working

Read Full Q/A … :

HP LaserJet 4

HP LaserJet 1160 pick-up problem
ANSWER : Take the black rubber roller out. Clean it and turn it 90-180 degrees so there is fresh rubber in the “corner”.

Read Full Q/A … :

HP LaserJet 4

HP DeskJet 510 – problem
ANSWER : Recently started to look for a trusted and high-quality work with a broker for binary options, but the search was not a very successful, and my friend who is already a few years makes this kind of activity offered me options brokers review – site who himself uses optionsbrokersreview.com

Read Full Q/A … :

HP LaserJet 4

HP PSC 1610 – problem installing hardware
ANSWER : If you want to get proper detailed information about hp printer then you should call on 1-888-924-2961 toll free number. They provide you step by step methods of installation process and driver support services.

Read Full Q/A … :

HP LaserJet 4

HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!

Read Full Q/A … :

HP LaserJet 4

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP LaserJet 4

HP Officejet 7310 problem
ANSWER : My HP Officejet7310xi All-in-One has an error message 0x886a789a on a blue screen, with Auto Answer, !, and Power (Print On) flashing. What does this indicate?

Read Full Q/A … :

HP LaserJet 4