HP Color LaserJet 4650N
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
- Step 1 Paper Tray. …
- Lift the left and right side flaps away from the paper tray to remove them. …
- Remove the left spring by grabbing the rubber tips connected to the spring and lifting up. …
- Remove the right spring by grabbing the rubber tips connected to the spring and lifting up.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
The Status Indicator light blinks and turns red.
- On the HP sprocket app, touch OK to clear the error message.
- Turn off the printer.
- Remove the top cover by sliding it away from the output slot, and then set it aside. …
- Remove any loose photo paper from the input tray.
- Reload the HP Sprocket Photo Paper with the blue card.
This is often caused by the fact the pick-up roller is worn out. The layer of rubber around this plastic part overtime gets too smooth, preventing paper from feeding properly into the printer. This fix is not really hard, will take no more than half an hour and costs around 10,- (Euro or Dollar).
Make sure your mobile device settings allow a connection with your Sprocket. Turn on the Sprocket. On your mobile device, open the Bluetooth settings menu, and then make sure Bluetooth is enabled. Check the settings on your Android or iOS device.
This is often caused by the fact the pick-up roller is worn out. The layer of rubber around this plastic part overtime gets too smooth, preventing paper from feeding properly into the printer. This fix is not really hard, will take no more than half an hour and costs around 10,- (Euro or Dollar).
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.
Read Full Q/A … :
HP Color LaserJet 4650N
HP 2200 – Won't feed paper and squeals
ANSWER : My suggestion: laser mirror motor has dry bearing (the squeal) and the printer won’t feed paper until it gets up to speed. Someplace on fixyourownprinter is an article explaining how to get to the motor & put a drop of TriFlow Synthetic PTFE oil on it. Worked for me…
Read Full Q/A … :
HP Color LaserJet 4650N
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP Color LaserJet 4650N
HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)
Read Full Q/A … :
HP Color LaserJet 4650N
HP DeskJet 722C Paper Feed Problem
ANSWER : Detach the force string from the holding nothing back one and expel all paper from it.
Read Full Q/A … :
HP Color LaserJet 4650N
HP PSC 1210 Service Manual?
ANSWER : Hi Abe,
Read Full Q/A … :
HP Color LaserJet 4650N
Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.
Read Full Q/A … :
HP Color LaserJet 4650N
HP laserjet 3100 multiple page feed fixed!
ANSWER : Can you tell me what kit you are referring to because I have the exact problem with my 3100 printer?
Read Full Q/A … :
HP Color LaserJet 4650N