HP Color LaserJet 4550

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If one or more toner cartridges are installed incorrectly, this may result in a 54.2 carousel rotation error. This error is typically accompanied by a loud grinding noise. NOTE: The carousel is the rotating part under the top cover to which all four print cartridges attach.
`Error 1` displays and the Resume light blinks

An E1 error occurs when the paper settings in the print driver do not match the paper loaded in the printer. Go to HP Customer Support, enter your printer model, and then search for Paper Mismatch for the document on how resolve the issue.

An Er/02 error message indicates that the toner cartridge door is open or not closed completely. To resolve the error, open the toner cartridge door, and then close it completely.
This indicates a paper jam in the Input tray area. The Attention light blinks, the Paper light is on , and the control panel character display alternates between Er and 05. This indicates a paper jam in the Imaging drum area.
This error is primarily caused by one of the following conditions: A transfer alienation failure in which the ITB is stuck and unable to properly engage the internal transfer rollers. The SR9 sensor (the primary transfer roller disengagement sensor) has gone bad. The fuser drive assembly has failed.
The flag located right of the pick-up roller has a fixed position. If the flag becomes stuck or broken, it will produce a 60.02 tray lift error or a “LOAD PAPER” message. If this flag is broken or if the sensor has failed, the RM2-6368 paper feed guide will need to be replaced.
Fortunately, the E1 Error Code normally isn`t too serious and is among the most common errors that appear on boilers. Typically, the E1 Error Code means that your boiler is running low on pressure, which is the cause of the boiler locking out and not working.
That error code indicates a failure of the yellow laser scanner. Unplug and leave for a few minutes, also make sure you are plugged directly into the wall and not into a surge protector.
Verify that the toner cartridge and the transfer roller are seated correctly. Ensure that the tray pickup, feed, and separation rollers are installed correctly and show no damage or wear. Check if the rollers are installed correctly.
During a print job, the ink cartridge carriage stalls in the printer, and a Carriage Jam or E3 error displays on the printer control panel. Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.
This system contains a TPM module that is not supported on the device or belongs to another device. Recommended action: Turn the printer off and then on.
During a print job, the printer stops feeding pages, an E4 error displays and the Resume light blinks. This indicates that paper might be jammed inside the printer.
This is a fault related to the feed motor. You can do only a couple of things: 1) You can check if the connectors of the feed motor are well connected both at DC controller and the motor itself.
The 59. F0 has been a common error code on the HP CLJ M452 and M377 / M477 MFP models. The printers service manual references this error to a “drum motor assembly” but in most cases has been resolved by replacing the Transfer Belt assembly (RM2-6454).
HP Printer Color Laser Jet Pro MFP M477fnw 60-02 error. A 60.2 error is a tray lift error for tray 2. This can be caused by an issue with tray 2 lift mechanism, a broken tray 2 or something jammed that is preventing the tray from lifting properly.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds. Then reconnect the power cable to the printer and wall outlet rather than a surge protector. This ensures the printer is receiving full power and may help this situation.
Run Diagnose & Fix

Open the HP Smart app, and then open Diagnose & Fix. Windows: Click the Diagnose & Fix icon in the bottom left corner. macOS: Click your printer, click Printers in the top menu bar, and then click Diagnose & Fix.

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
`Operation could not be completed (error 0x00000709) Double check the printer name and make sure that the printer is connected to the network. Hi, It`s a known issue in Windows 11 22H2. This error occurs because the default connection method has changed in 22H2.
Error 0x0000011B is a common issue on Windows systems and can have various causes. Here are the most common causes and how to resolve them: Driver conflict: This happens when two drivers access the same resources at the same time. To resolve this issue, check for any conflicting drivers and update or disable them.
If one or more toner cartridges are installed incorrectly, this may result in a 54.2 carousel rotation error. This error is typically accompanied by a loud grinding noise. NOTE: The carousel is the rotating part under the top cover to which all four print cartridges attach.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
The four standard cartridges would be present attached to a rotating device called Carousel under the printer cover. The issues with the carousel rotation and the misplacement of the cartridges upon the printer devices would result in issues with the printer device called as printer error 54.2.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Color LaserJet 4550 Streaking
ANSWER : hello,

Read Full Q/A … :

HP Color LaserJet 4550

HP PSC 1510 copying problems
ANSWER : my hp photocopy is not working

Read Full Q/A … :

HP Color LaserJet 4550

HP 4250 13.06.00 Fuser output paper stop !
ANSWER : pick up solenoid

Read Full Q/A … :

HP Color LaserJet 4550

HP LaserJet 1160 pick-up problem
ANSWER : Take the black rubber roller out. Clean it and turn it 90-180 degrees so there is fresh rubber in the “corner”.

Read Full Q/A … :

HP Color LaserJet 4550

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP Color LaserJet 4550

HP PSC 1610 – problem installing hardware
ANSWER : If you want to get proper detailed information about hp printer then you should call on 1-888-924-2961 toll free number. They provide you step by step methods of installation process and driver support services.

Read Full Q/A … :

HP Color LaserJet 4550

Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.

Read Full Q/A … :

HP Color LaserJet 4550

HP DeskJet 510 – problem
ANSWER : Recently started to look for a trusted and high-quality work with a broker for binary options, but the search was not a very successful, and my friend who is already a few years makes this kind of activity offered me options brokers review – site who himself uses optionsbrokersreview.com

Read Full Q/A … :

HP Color LaserJet 4550