HP Color LaserJet 4500DN

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again.
your pickup roller is dirty and the printer can`t grab a piece of paper. it will say paper jam when it does this. get a drop of dishsoap and clean the pickup roller of your printer with this. scrape at it with your fingernail to get the roller clean and wipe it off with a damp washcloth.
If the paper is even slightly askew, the rollers will pick it up a little crooked, and — guess what — the crooked sheet will immediately get jammed. So even though there`s no paper stuck when you start printing, the loose paper guides are ensuring that a sheet gets jammed whenever the printer starts doing its thing.
Slide the paper all the way into the printer. The leading edge of the paper will stop at the Paper Drive Roller. Locate the Paper Sensor/OOPs sensor on the right side of the paper path. It can be seen from the top of the printer with the Top Cover open and has red, black, and blue wires attached to it.
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again.
Learn how to clear jams in the duplexer (duplex models only) on the HP Color LaserJet Pro M452, M454, and MFP M477, MFP M479, MFP M377. At the rear of the printer, open the rear door to access the duplexer. Gently pull out any jammed paper from the rollers in the rear door area.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
During a print job, the printer stops feeding pages, and a Paper Jam error message displays on the printer control panel. This indicates that paper might be jammed inside the printer. note: Paper jams can be real or false. The printer might report a paper jam even when there is no jammed paper.
The common reasons for this issue are various, for instance, the paper input tray is overloaded, dust or moisture can affect the paper feed or paper pick rollers, the printer driver is old, etc. Thus, the printer cannot detect the paper that has been inserted into the tray.
The Auto Sense sensor detects unique Auto Sensing marks on the back of select HP media and the printer automatically selects appropriate color profiles and print settings, including paper type and print quality. When printing directly from a memory card, the sensor also detects the paper size, up to 8.5 x 11-inch.
Pull the jammed paper down and out of the printer. Open the back cover (back output tray). Pull the tab toward you to open the fuser cover (1). Pull the jammed paper out of the fuser unit.
Pull the jammed paper down and out of the printer. Open the back cover (back output tray). Pull the tab toward you to open the fuser cover (1). Pull the jammed paper out of the fuser unit.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.

Read Full Q/A … :

HP Color LaserJet 4500DN

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :

HP Color LaserJet 4500DN

hp c7280 clear paper jam
ANSWER : paper jam

Read Full Q/A … :

HP Color LaserJet 4500DN

Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.

Read Full Q/A … :

HP Color LaserJet 4500DN

Paper Jam error but no paper jam
ANSWER : Obviously you didn’t get all the paper cleared out. There is a small scrap in the paper path causing the jam when the paper hits it. You can try clearing it out by inserting something stiff like a piece of file folder from the back of the printer into the paper path and pushing the offending piece out that way.

Read Full Q/A … :

HP Color LaserJet 4500DN

HP LaserJet 4200 paper jam fix
ANSWER : Yes, thank you! You did a thorough post! If your still hacking away at HP’printers you will know that unfortunately HP kept using that type of solenoid with the “Sticky Mess” on all of their new Equipment. I use this method almost everyday (without removing the actual solenoid). I’ve replaced so many I got carried away and now, I sell a solenoid repair kit! It’s for those people that like convenience. I provide a professional supply of perfect material with sticky back tape pre-cut to exact dimensions! All in a little kit. I have install videos, (I don’t charge for that I believe in the Do-it -Yourself approach.) Sorry for the sales pitch… but here is my link.

Read Full Q/A … :

HP Color LaserJet 4500DN

HP LaserJet 1020 paper jam on output/exit
ANSWER : Good afternoon, I have a Laserjet 1020 with the same problem, when the paper comes out, it remains a last centimeter in the last needle and the orange LED flashes.You can confirm that this is the pressure roller that presses on the fuser? MAYBE IT’S TOO HARD TO TURN?

Read Full Q/A … :

HP Color LaserJet 4500DN

Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.

Read Full Q/A … :

HP Color LaserJet 4500DN