HP Color LaserJet 4500
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
If your HP printer not printing black ink correctly, here`s what you should do. Using non-genuine ink cartridges. Printheads that have become clogged. Ink cartridges that are defective or empty.
Open HP Smart app, click your printer, click Printers in the top menu bar, and then click Diagnose & Fix. Follow the instructions if any issues are found. If you still can`t print, remove and re-add the printer.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.
Right-click the printer that you want to use, and then click Printing preferences. Make your choices, and then click OK. Under option Print color select color , then the OK button. Now the printer is set to print in color.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I just bought an officejet 3830 2 weeks ago. Now it won't print at all! Says inkjet jam. It's not! I've done all the fixes as per hp's website now what?
Take it back and exchange it under warranty.
HP DeskJet 1220C Prints only Pink & Black
hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?
Either the cartridge carousel jumped out of alignment or the carousel brake solenoid is sticking. Both issues have been covered on the forum before. Do a search.
HP laser jet 3015 "Upgrade Error Call HP Support"
HP LaserJet 2200D won't print configuration page
Find someone with a HP LaserJet 4100 and you can configure the card to the IP you want:
officejet 4500 after paper load problem fixed : little part : where does it go
Sorry the pic didn’t make it. Here it is :
HP Deskjet 640c wont print??
hp deskjet 960c printing problem
RE: HP 960c printer. I have new cartridges and the test page prints out full color. When printing a color document the page prints in black & white. Why not color? The print page is on color not black & white.