HP LaserJet 5+
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
Lift the document feeder input tray to access to the document feeder output tray, and then remove any jammed paper from the output area. To avoid tearing any whole sheets of paper, pull the paper with both hands. Open the scanner lid. If there is paper jammed behind the white plastic backing, gently pull it out.
If your printer keeps jamming, you should know that the most common cause of a jam is misalignment of the paper. Paper needs to load in smoothly, completely flush with the tray. Overfilling the tray is a great way to ensure you will be spending some personal time getting to know the inside of a printer.
A paper jam is when paper or other printed material gets stuck or lodged in a printer and cannot eject.
Lift the document feeder input tray to access to the document feeder output tray, and then remove any jammed paper from the output area. To avoid tearing any whole sheets of paper, pull the paper with both hands. Open the scanner lid. If there is paper jammed behind the white plastic backing, gently pull it out.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
Read Full Q/A … :
HP LaserJet 5+
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
HP LaserJet 5+
Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.
Read Full Q/A … :
HP LaserJet 5+
Paper Jam error but no paper jam
ANSWER : Obviously you didn’t get all the paper cleared out. There is a small scrap in the paper path causing the jam when the paper hits it. You can try clearing it out by inserting something stiff like a piece of file folder from the back of the printer into the paper path and pushing the offending piece out that way.
Read Full Q/A … :
HP LaserJet 5+
hp c7280 clear paper jam
ANSWER : paper jam
Read Full Q/A … :
HP LaserJet 5+
HP LaserJet 4200 paper jam fix
ANSWER : Yes, thank you! You did a thorough post! If your still hacking away at HP’printers you will know that unfortunately HP kept using that type of solenoid with the “Sticky Mess” on all of their new Equipment. I use this method almost everyday (without removing the actual solenoid). I’ve replaced so many I got carried away and now, I sell a solenoid repair kit! It’s for those people that like convenience. I provide a professional supply of perfect material with sticky back tape pre-cut to exact dimensions! All in a little kit. I have install videos, (I don’t charge for that I believe in the Do-it -Yourself approach.) Sorry for the sales pitch… but here is my link.
Read Full Q/A … :
HP LaserJet 5+
HP LaserJet 1020 paper jam on output/exit
ANSWER : Good afternoon, I have a Laserjet 1020 with the same problem, when the paper comes out, it remains a last centimeter in the last needle and the orange LED flashes.You can confirm that this is the pressure roller that presses on the fuser? MAYBE IT’S TOO HARD TO TURN?
Read Full Q/A … :
HP LaserJet 5+
Paper jam in tray 2 (but no paper pulled from tray) also M476DN models
ANSWER : Isopropyl alcohol is not recommended for rubber rollers. It dries out the rubber and hasten it’s cracking and breaking. It will do nothing to restore the grip. Those rollers are really hard to replace. It would be easy if that dumbass secondary menu really worked. None of the techs I’ve spoke to ever got into it. Everyone I know sends a print job and listens for the roller to rotate into position where you can pull it off.
Read Full Q/A … :
HP LaserJet 5+