HP LaserJet 4345
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped). If the other steps in this document fail to resolve the issue, then reset the printer.
Dust, dirt, or debris: Not cleaning the HP Printer can also result in a paper jam error. So, if you find that no paper is stuck but a paper jam error showing, you must check for the dirt or dust on the device.
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary. Make sure that the power is turned on and remove any paper from the rear tray.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
Adjust the paper guides in the tray to match the size of the paper. Remove the paper, smooth it out, then reload it. If the paper misfeeds, do not use that paper. Remove the moist paper, then replace it with new, dry paper.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default. If you don`t see the Set as default option, the Let Windows manage my default printer option may be selected.
The paper-thickness lever is located on the left side of the printer. The numbers next to the lever indicate the thickness setting. Use the table below to select the appropriate paper thickness.
Your printer can become misaligned if there is any paper stuck in the machine, print cartridges are clogged or dirty, improper installation of cartridges and using low quality cartridges. Additionally, a printer can become misaligned after the machine completes a large print job.
Even if the paper you select matches the printer`s recommended thickness range, adding too much or too little of it to the input tray can result in unevenly fed sheets. The rollers that move paper out of the tray function best when you maintain at least a mid-level stack but don`t exceed or undershoot the loading line.
The crooked or skewed image may be a result of cutting inaccuracy, paper expansion, or the storage conditions of the paper. On the other hand, crooked and skewed images can be fixed through the alignment adjustment setting feature if it is available in your printer.
Click: `Open the HP Photosmart Toolbox` or: `Service this device` Click: Device Services tab. Click: Calibrate the Device or Clean the Print Cartridges or Align the printer. Follow the instruction which will appear on-screen.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
hp c7280 clear paper jam
ANSWER : paper jam
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
HP 4250n 41.3 unexpected paper size
ANSWER : BULLSHIT
HP Officejet Pro 8500 Wireless with fake paper jam
ANSWER : HP Officejet is by far one of the frustrating piece of equipment I have ever owned. I bought it as unused in the package, at that point no warranty left. less than 6 months and 500 pages the white cog gear wheel broke. Luckily with instructions in this site I manage to glue it back together. Then I bought new ink – problems started as they were not original HP 30$ per cartridge. Ordered originals (here in China), took over one week to get them. Then found out that printhead needed to be replaced => more than 100$ spent. Still constant problems: If my wife kids print, I need to be stand-by as you never know what happens. Really an Office level equipment. After cleaning one paper jam I broke the encoder tape, took me another 4 hours to get it fixed. Then broke the cog gear again and got it displaced. Another 4 hours. Only reason I am not throwing this s***t out of window is that there are still ink left. Luckily this drinks them like a horse, for sure I will no more buy new ink. I will get a new laser instead, and not from HP. About cog wheel fixing: make sure that the white wheel is positioned correctly so that the small torx in shaft goes into the slit in the white wheel. When fitting the black cover back, make sure that the white washers on both sides fit into to slits of the black cover. Good luck.
HP 4250 13.06.00 Fuser output paper stop !
ANSWER : pick up solenoid
Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.