HP LaserJet 4250N

Experienced technical support provide their insights in answering this question :
Pull and reset the fuser. Make sure both sides are back into their position.

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The jam message may vary depending on the location of the page or pages that may be jammed. At times, a related message such as a “13.01 Paper Jammed in Tray 2” which indicates that the paper did not arrive at the pre-feed sensor (PS102) in the amount of time allotted by the DC Controller.
00 Jam in Top Cover Area Error on HP LaserJet 4200 or HP LaserJet 4300 series. If you see this error code 13.20. 00 “Jam in Top Cover Area” on either an HP LaserJet 4200 or HP LaserJet 4300 series printer, the printer either has a sensor blocked or it has an incorrect model fuser installed.
The above listed printers may produce a 13.20. 00 `jam in right front door` error code. While there may be no paper visible, this is usually caused by a dislodged tray 1 pickup roller cover which disrupts proper positioning of the duplex refeed sensor flag.
Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source.
It means the top of the paper isn`t being detected arriving at the fuser delivery sensor.
The error is 13.02. 00 indicating it isn`t reaching the top cover sensor. The paper is getting stuck at the fuser, and the fuser is leaving a very noticeable indentation mark.
Insert the stack of paper into the product, and then gently push the paper guides snugly against the paper. Make sure that the paper is fully inserted into the product. Try printing again. If the issue is not resolved, try loading different brands of paper and different types of paper, one type at a time.
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again.
With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. Remove USB cable, if present. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
just GOTO settings > printer properties of your printer > preferences>paper quality >change the paper to A4 size . and restart the printer.
just GOTO settings > printer properties of your printer > preferences>paper quality >change the paper to A4 size . and restart the printer.
The message Paper Jam may appear on the display if the Brother machine is not feeding paper correctly, paper scraps have become stuck in the print head path, the paper is not loaded properly in the paper tray, the jam clear cover located in the back of the machine, is not installed properly or the PE Actuator is …

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP 4250n error 13.05.00 Phantom Jam
ANSWER : Pull and reset the fuser. Make sure both sides are back into their position.

Read Full Q/A … :

HP LaserJet 4250N

hp laserjet 4250n service error 49.4c02
ANSWER : The response by DMZCompute worked perfectly. Thank You!

Read Full Q/A … :

HP LaserJet 4250N

HP 5150 false Printer Jam error
ANSWER : This fix is appropriate to paper jams the machine suppose are in the rear duplexes and often happen after a authentic jam that has cheap term paper writing service tattered the paper inside the machinery.

Read Full Q/A … :

HP LaserJet 4250N

HP 4250n – blurry text
ANSWER : What is the fuser? And how can it be changed?

Read Full Q/A … :

HP LaserJet 4250N

Paper Jam and carriage jam code when nothing is jammed
ANSWER : Did you try cleaning the encoder strip that runs through the cartridge assy.? Use Window Cleaner on a paper towel. Also, check inside on the right. I’ve seen a lot of times where there is a folded up scrap of paper that stops the carriage from going all the way to the right.

Read Full Q/A … :

HP LaserJet 4250N

How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.

Read Full Q/A … :

HP LaserJet 4250N

HP 4250n 41.3 unexpected paper size
ANSWER : BULLSHIT

Read Full Q/A … :

HP LaserJet 4250N

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet 4250N