HP 3650 ink jet printer problem

Reasons why your HP printer has ink but won`t print

This may seem obvious, but it sometimes happens: first make sure your paper tray has paper in it. Misalignment, clogged printheads, faulty data communication or insufficient ink levels can also be sources of the problem.

The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.

If your printer is running low on ink, it may start printing blank pages. To check your ink levels, go to your printer`s control panel and select the Ink Levels option. Whenever the ink levels are low, replace the cartridges with new ones. You can also try shaking the cartridge gently to redistribute the ink.

Press the tiny reset button located beside the chip and hold for 10 seconds. Depending on the brand and model of the cartridge, you may not need to hold the button for 10 seconds, but it won`t harm the cartridge so do it anyway just to be safe. Done.

Troubleshoot a blinking orange light on HP DeskJet.

It indicates firmware issues, paper jams, or improperly installed cartridges. Resolve it by performing a power reset of your printer.

The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.

Instead of adding the printer to the existing network, you may attempt to print via Wi-Fi Direct. In case this does not work as well and you refuse to use HP Smart, it`s on you to bring the right drivers and install them manually.

You can visually inspect the remaining cartridge levels on your printer. If they are full but you still cannot print properly, check the cartridge`s expiry date. Expired ink cartridges often dry up which causes problems in the print results.

Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.

The reason may be quite simple – your cartridge is dry or clogged. Still, adding fresh ink may not resolve the situation. Try to wipe the cartridge with a lint-free cloth dampened with isopropyl alcohol. Please avoid touching the metal parts of these cartridges and the chip not to damage their electrical contacts.