HP Color LaserJet 3500
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The HP LaserJet Fuser helps make sure your HP toner is applied to your paper evenly and with vivid color and detail on every page without putting a major dent in your budget. It lets you print up to 150,000 pages of dynamic quality before you need to replace it.
Push up on the release buttons on both sides of the fuser to release the springs, and then pull the fuser out of the printer. Place the old fuser aside for recycling. Remove the new fuser from its box. Remove the protective packaging.
The fuser unit or fuser assembly, is a critical component of your laser printer. Using pressure and heat, it fuses the toner powder onto the page to create a print, and without out it, your printer cannot operate.
A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.
The fuser unit is a periodic maintenance part and should be replaced to maintain optimum print quality and reliability and to prevent paper jams.
The message “Fuser Kit Low” or “Fuser Kit Very Low” on your HP Color LaserJet M553 series printer is a warning that you have reached the recommended number of prints for your fuser assembly. (The fuser assembly is the consumable part in your printer which heats up and bonds toner to the paper.
The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.
Streaking, smudging, black lines, and double images are all symptoms of a bad fuser. When you notice these printing defects and experience problems, such as paper jams or wrinkles, this is a good sign to replace the fuser kit.
The fuser unit must be replaced every 100,000 pages, usually along with the transfer belt and feed rollers as part of a maintenance kit. The error code 010-351 indicates that the fuser has reached 75,000 pages and as a result has 25% life or less remaining.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP 3500 59.99 error
ANSWER : (Trying again, this website thinks return means end of comment)
Read Full Q/A … :
HP Color LaserJet 3500
HP 26 vs HP 29 cartridge compatibility
ANSWER : Eu decidi fazer um binário opções, o primeiro passo neste trabalho yavlyaetsya formação inicial e os fundamentos .. Put Options and Call Options Trading É por isso que eu escolhi um par de artigos de alguns sites na Internet, se você pode se perguntar vospolzovatsya put-call-options.com/br/what-are-options/binary-options-and-strategies
Read Full Q/A … :
HP Color LaserJet 3500
HP 4250 13.06.00 Fuser output paper stop !
ANSWER : pick up solenoid
Read Full Q/A … :
HP Color LaserJet 3500
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP Color LaserJet 3500
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP Color LaserJet 3500
HP 4101MFP Hard Drive Question
ANSWER : To initialize: turn off – Press start and hold down while turning on, release after all three light light, you should see initialize disk hit check, and allow to boot.
Read Full Q/A … :
HP Color LaserJet 3500
HP PSC 2410 clicking noise problem
ANSWER : I have the same issue… I’ve tried everything above… I don’t believe it’s dust as this happens on and off occasionally… I think I may need to make a youtube video of me “fixing” this printer! I’m really frustrated with this thing!! If it doesn’t work soon, I’m gonna by the solution in the form of a hammer!
Read Full Q/A … :
HP Color LaserJet 3500
HP 9040 MFP Error code
ANSWER : bonsoir
Read Full Q/A … :
HP Color LaserJet 3500