HP LaserJet 2200

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The streaks or lines might be caused due to low ink levels in one or both ink cartridges. Check the ink levels using the HP Toolbox to determine if the ink cartridges are low on ink and need to be replaced. note: Ink level warnings and indicators provide estimates for planning purposes only.
HP has determined that 99% of all lines and streaks on copies made by feeding the original documents through the ADF are caused by debris on the ADF glass. Debris can include dust, paper or toner dust, residue from sticky note adhesive, correction fluid or tape, ink, fingerprints, and more.
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
A printer printing lines on the page are normally caused by a blocked, dirty, or damaged print head. Blocked ink cartridge nozzles, or not removing protective seals correctly when you installed a new ink cartridge can also cause missing lines of print.
Streaks and unwanted lines could mean that the printer heads are out of alignment. There`s an alignment tool in the printer`s control panel. If that`s not the issue then the printer is dirty. Printer ink stripes may appear along the edges of the paper, which means there`s ink on the rollers and other parts.
White lines will typically start appearing on your print outs due to a clogged up printer head. Your first port of call when solving this problem is to run the cleaning program on your printer, which should be accessible through its settings menu.
Double printing can occur for several possible reasons including an improperly seated ink tank, a misaligned print head, and a dirty encoder stip. Select one of the links below to get detailed instructions to address the issue. Check that all ink tanks are seated properly. Refer to Replace an ink tank.
If your laser printer is causing horizontal black lines you either have a problem with the optics or the drum. Cleaning the optics and replacing the drum should fix the problem in most cases.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
Smears and smudges on the paper can be caused by dirt, dust, or toner accumulated on the rollers or transfer belt as it passes through the paper. Cleaning your printer, particularly the rollers, is one of the options for removing black markings from paper.
Fill the container halfway up with ink, then use a tiny spoon (like 1/8 teaspoon) to add gum arabic to the ink a little bit at a time. First, stir in one spoonful, then test the ink to see if it still bleeds. If it does, add another spoonful. Test again, and continue to add gum arabic until the ink no longer bleeds.
Smears that appear in addition to otherwise well-formed output may signal toner contamination inside your LaserJet, either from a leaky cartridge or from improperly fused sheets that leave toner residue behind. Smears at the edge of the sheet that enters the printer first point to dirty paper guides.
Streaks and unwanted lines could mean that the printer heads are out of alignment. There`s an alignment tool in the printer`s control panel. If that`s not the issue then the printer is dirty. Printer ink stripes may appear along the edges of the paper, which means there`s ink on the rollers and other parts.
A cartridge may be running out of ink even if the graphic shows ink remaining (see the note at the start of this section). Lines or streaks always appear in printouts when the cartridges begin to run out of ink. Replace print cartridges that are out of ink or low on ink.
Regular washing and waxing helps to remove Black Streaks before they get good and stuck. A good regular wax job helps to prevent Black Streaks in the first place. A good layer of wax will help to minimize the way Black Streaks set into the surface. Waxing creates a physical barrier across the surface.
Streaks and unwanted lines could mean that the printer heads are out of alignment. There`s an alignment tool in the printer`s control panel. If that`s not the issue then the printer is dirty. Printer ink stripes may appear along the edges of the paper, which means there`s ink on the rollers and other parts.
Vertical lines in prints are an early warning sign of a low ink cartridge, which may show up before the printer`s low ink alerts start. You can fix the problem by replacing the low cartridge. Gently shaking the drained cartridge a bit may help to get another few prints out of it without vertical lines.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
Vertical lines in prints are an early warning sign of a low ink cartridge, which may show up before the printer`s low ink alerts start. You can fix the problem by replacing the low cartridge. Gently shaking the drained cartridge a bit may help to get another few prints out of it without vertical lines.
Vertical lines in prints are an early warning sign of a low ink cartridge, which may show up before the printer`s low ink alerts start. You can fix the problem by replacing the low cartridge. Gently shaking the drained cartridge a bit may help to get another few prints out of it without vertical lines.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.
When your printer leaves black lines, the lines indicate that there are excess toner powders on the rollers or transfer belt within the printer. As the paper is moved along by the rollers and transfer belt, any excess powder left on them can result in lines being left on the paper.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP 2200 – blinking attention light and tray 2
ANSWER : Nice day. (QUALITY IS OUR CULTURE)

Read Full Q/A … :

HP LaserJet 2200

HP 2200 – Won't feed paper and squeals
ANSWER : My suggestion: laser mirror motor has dry bearing (the squeal) and the printer won’t feed paper until it gets up to speed. Someplace on fixyourownprinter is an article explaining how to get to the motor & put a drop of TriFlow Synthetic PTFE oil on it. Worked for me…

Read Full Q/A … :

HP LaserJet 2200

HP Photosmart C6180 Ink System Failure
ANSWER : This has been a life saver for us. Thank you very much for your help.

Read Full Q/A … :

HP LaserJet 2200

Reseting the ink levels for hp c7280,
ANSWER : I held the # and 6 down long enough to start a complete re-set of the printer But the Black ink level still shows as depleted when it is actually still half full.

Read Full Q/A … :

HP LaserJet 2200

Formatter board repair (HP 2200, 4100, 4600 etc.)
ANSWER : Yes i have two printers one is hp laser jet p2055dn when i print test page,it print blank page and create jam inn cartridge area and another one is hp laserjet enterperise M606,When i try to print tests page,it does not print but give me error code 50:00:00 on the contral panel,who can help me with these printers problem Thanks

Read Full Q/A … :

HP LaserJet 2200

Hp 3110 ink system failure
ANSWER : Well I just solved my issue with my hp 3310 displaying the ink error code. I held the OK cancel black and color buttons down at same time. And while holding those down hit the power button when machine shut off I released buttons hit power button on it came on and shut off. Hit power button again and it will reset machine and run a maintainace program. When all is done run a print report. Mine works fine. Good luck.

Read Full Q/A … :

HP LaserJet 2200

HP DeskJet 950C Leaking Ink
ANSWER : Thanks for the “loose, white rectangular piece” comment in my 990cse. I found this same white piece of rubber today jamming up the cleaning station carriage assembly and was wondering where it came from!

Read Full Q/A … :

HP LaserJet 2200

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet 2200