HP PSC – Printer / Scanner / Copier 1350
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary. Then reload the paper. If thick media does not feed, make sure you are loading it straight into the product, not at an angle. If paper jams when you print on both sides of the paper, try loading fewer sheets.
Remove any severely bent, wrinkled, or torn paper from the stack. Check for obstructions inside the input tray area. Make sure nothing blocks the paper from engaging with the roller. Even small pieces of paper can cause paper feed issues.
If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary. Make sure that the power is turned on and remove any paper from the rear tray.
Start by choosing “File” and then “Print,” and clicking the “Position and Size” settings. Usually, the default option is “Scale to Fit Media,” which prints to the page margins. Deselect it, then manually enter scale, height and width values that equal the full size of your paper. Click “Print” to print your image.
The most common cause of this issue is paper misalignment. Make sure you properly insert the papers in the tray and avoid overfilling the tray. If this doesn`t solve the problem, check the troubleshooting section of the printer`s user manual.
Sheet feeder: Holds the blank paper and automatically feeds the paper during printing.
When it isn`t working properly, the quality of your prints can suffer. Signs of a bad transfer roller include streaking, squealing, jamming and odors emanating from the printer. Troubleshoot your transfer rollers to restore your prints to their normal high quality.
The paper has holes along both sides that fit over the sprockets located on the feeder wheel. When the wheel turns, it feeds the paper into the printer. The holes are torn off the paper after the printout is complete. And, yes, printers still use this type of feeder mechanism.
This is often caused by the fact the pick-up roller is worn out. The layer of rubber around this plastic part overtime gets too smooth, preventing paper from feeding properly into the printer. This fix is not really hard, will take no more than half an hour and costs around 10,- (Euro or Dollar).
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
This is often caused by the fact the pick-up roller is worn out. The layer of rubber around this plastic part overtime gets too smooth, preventing paper from feeding properly into the printer. This fix is not really hard, will take no more than half an hour and costs around 10,- (Euro or Dollar).
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350
HP psc 1210 Wont Feed Paper
ANSWER : This printer seems to have special problems with paper feed asy. When functioning works
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350
Help the cover on the back of my printer is lost and my printer keeps on shooting out paper from the back end with no writing on it?
ANSWER : There are no parts available, therefore no solution to your problem.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350
HP 2200 – Won't feed paper and squeals
ANSWER : My suggestion: laser mirror motor has dry bearing (the squeal) and the printer won’t feed paper until it gets up to speed. Someplace on fixyourownprinter is an article explaining how to get to the motor & put a drop of TriFlow Synthetic PTFE oil on it. Worked for me…
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350
HP Laser Printer error 13 – paper jam
ANSWER : Nice day. (QUALITY IS OUR CULTURE) Baihui Technology Co.,Ltd. is one of the grey hair in Guangzhou China. Our core competencies is Fuser Assembly for HP brand, Our niche market is USA. With us your money in safe your business in safe. Hope fully to be your honest dealer and trustworthy supplier in China. E-mail: [email protected]
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350
Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350
Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 1350