HP DeskJet 1220C
Experienced technical support provide their insights in answering this question :
This problem isn’t about the paper picker. Here is the real issue and fix:
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The photo tray is overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper width guide is too tight against the paper stack.
There are a number of reasons why this might happen. In a large number of cases we come across, the photo paper weight (which is measured in GSM) or overall thickness exceeds the printer`s ability meaning it is too think or too heavy for the rollers to successfully handle.
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again.
If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary. Make sure that the power is turned on and remove any paper from the rear tray.
Dust, paper fiber, and other debris might accumulate on the pick rollers and cause paper feed issues. To help prevent paper feed issues, clean the rollers inside the printer and in the duplexer (if equipped).
Select > Paper Setting > paper source > Print Adjustments > Paper Feed Adjust.
HP Photo Paper is designed to print with inkjet printers. If you have a LaserJet printer, choose a glossy or matte HP Business Paper, depending on the finish you need. If you are printing a business document, using HP Business Paper can produce high-quality professional printouts for your office or customers.
Yes, you can use glossy photo paper in the printer as long as it meets supported paper size, supported paper weight, and quality requirements.
this can happen if a small piece of paper is stuck in the paper path or if the rollers have become covered with lacquer from the paper, try cleaning the pickup rollers and the paper path, with a slightly damp cloth (not wet).
A paper feed issue can occur for several reasons, such as dusty or contaminated paper rollers, the condition of the paper in the tray, or even issues with the software. To resolve the issue, try each solution in this document, and then use the steps in this section to print a self-test report.
Misfeeds occur frequently. The number of sheets loaded exceeds the capacity of the printer. Load paper only as high as the upper limit markings on the side fences of the paper tray, or the markings on the paper guides of the bypass tray. Misfeeds occur frequently.
A piece of paper stuck in the paper tray or inside the printer can create a paper jam. Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer.
When it isn`t working properly, the quality of your prints can suffer. Signs of a bad transfer roller include streaking, squealing, jamming and odors emanating from the printer. Troubleshoot your transfer rollers to restore your prints to their normal high quality.
For cleaning, HP recommends using HP Equipment Cleaning Wipes, but you can use an HP-approved lint-free wipe and deionized or distilled water. Note: If dark spots appear on back side of prints, clean drum screen. Note: If minilab prints more than 2000 prints each day, clean drum screen up to twice daily.
Use isopropyl alcohol or ethanol according to the manufacturer`s safety guidelines, as applicable. Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure that no lint or other material remains on the roller.
The manual feed slot is located on the front of your printer. It can be closed when not in use, making the product more compact. Use the manual feed slot to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray.
Printer rollers are the small circular rubber pieces that help feed printer paper through your printer. Over time, they can accumulate dust from the paper and ink residue from printing double-sided pages. To clean your printer rollers, you`ll need to first locate them in your printer.
This issue is common when using paper that exceeds the recommended thickness for the machine. To correct the feeding issue, add more paper to the paper tray.
HP InkJet printers are best for photo printings, graphics-heavy printing, small to mid-size businesses, and home office use.
No set standard makes a printer-specific to photos. You can, in theory, use almost any home printer to create black-and-white or color prints. Most printer software products include custom settings that will change the resolution of your print job to make them near perfect for photos.
Before you print, make sure in your printer property settings that the correct paper is selected. For example, if you are using one of our glossy sheets, please select either a glossy paper setting or cardstock. If you select plain paper, the ink may run.
Coated material (inkjet paper, glossy paper, vellum…) usually doesn`t work well. The toner only sticks to the coating (not to the paper) and will rub off or leave toner in the printer which will show up on subsequent prints. You should also be very careful with sticky back media.
There are a number of reasons why this might happen. In a large number of cases we come across, the photo paper weight (which is measured in GSM) or overall thickness exceeds the printer`s ability meaning it is too think or too heavy for the rollers to successfully handle.
The simplest explanation is that your monitor is too bright. Yes, it really is the most common reason your prints look wrong and the most popular solution for people contacting me over the years. Modern monitors are a lot brighter by default and this skews your editing/adjustment of tones.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP 1220C Photo Paper Feed Problems
ANSWER : This problem isn’t about the paper picker. Here is the real issue and fix:
Read Full Q/A … :
HP DeskJet 1220C
My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.
Read Full Q/A … :
HP DeskJet 1220C
Paper Feed Problem on HP R80
ANSWER : In the last examination it is our origination of death which chooses our responses to all the inquiries life puts to us. The most pleasant spot to be is in somebody’s idea; the most secure spot to be is in somebody’s petitions.
Read Full Q/A … :
HP DeskJet 1220C
HP DeskJet 722C Paper Feed Problem
ANSWER : Detach the force string from the holding nothing back one and expel all paper from it.
Read Full Q/A … :
HP DeskJet 1220C
hp 8600 pro when power on, paper jam message appear but there is no paper jam in the tray
ANSWER : Hp 8180 Photosmart All In One code keeps says paper jam and carriage jam when neither are jammed. I followed all the recommended things to do. I live in Raleigh NC any place to take this or any suggestion.
Read Full Q/A … :
HP DeskJet 1220C
Epson Stylus Photo T60 paper jam
ANSWER : paper jam
Read Full Q/A … :
HP DeskJet 1220C
Tray 1 (upper tray) paper feed problem
ANSWER : There is no way of adjusting the distance of lift. Could be that the pickup roller is worn enough that it will pick up a sheet that is higher, but not one that is lower down. You can look at the end of the roller that first makes contact and see if it is worn smooth.
Read Full Q/A … :
HP DeskJet 1220C
HP DeskJet 1220C Prints only Pink & Black
ANSWER : hi everyone. i have an hp ink advantage 5525 all-in-one. changed all cartridges as they were empty and when i tried to print i got blank pages. i gave a print order a couple times to find out what was going on and found out that yellow and magenta inks worked but not cyan and black. removed cartridges, clean and all many times and nothing happened. then i tried this youtu.be/f57jOGj-G5s and the print quality of magenta and yellow improved significantly but still no black or cyan at all. i can’t do the running water thing because the print head is not detachable. any suggestions?
Read Full Q/A … :
HP DeskJet 1220C