Canon Bubblejet (BJ) 5

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If you`re still experiencing Canon ink cartridge cannot be recognized, try to hold down the Stop/Cancel button for 15 seconds. It`s a circle with a triangle inside.
When the printer asks you to disable detection, press and hold the Stop button for at least 5 seconds before releasing it. On that color, ink level detection will now be disabled. It will be your obligation to periodically check the cartridges and refill them well before they are empty.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Open the Printer Driver Setup Window through the Start Menu. Select Settings, then Devices and finally, Printing Preferences from the menu. Then, click the Maintenance tab and click View Printer Status. This will bring up a window that details the full status of your printer and its ink levels.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
A beam of light passes inside the cartridge through a prism, which is then detected by an optical sensor. Based on the level of light refraction, the printer is able to determine the ink level of the cartridge.
Open the Canon IJ Printer Assistant Tool. Make sure that the printer is on, and click Remaining Ink Notification Settings. Select the ink color and click Reset to reset the remaining ink level counter. When you reset the remaining ink level count, you must refill the ink tank to the upper limit line.
Be sure to reset the ink level after refilling the ink. If you refilled two or more colors, you need to select all of the colors that you refilled and reset the ink level. Unless you reset the ink level, the ink level displayed does not change even after refilling the ink.
There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.
Click the start menu and search for `Devices and Printers`. Select devices and printers in the search bar. This will allow you to see the printers connected to the computer. Click the printer you want to check, and you`ll see the ink levels at the bottom of the devices and printers section.
When the low ink warning appears, press and hold the STOP/RESET or RESUME button on the printer for 10 seconds. This button will flash with an orange light when the warning pops up, so it will be relatively easy to find.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon MP600 uses color ink to print black and white…
ANSWER : Have you tried setting the print out to grayscale only (black and white)?

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Ink Tank Cannot Be Recognized(Canon mp500)
ANSWER : My MX922 ran out of yellow (slowly) then didn’t recognize first one and then a second new Canon CLI-251 yellow cartridge. I’ve always used Canon. Then I inserted a 251a Y (extra large) yellow, and it worked immediately – for how long, I don’t know. Guess I’ll order another set of XL ink tanks – either that or a new printer.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon Printer does not print blue ink
ANSWER : I was also facing same issue with my printer. I tried a lot to fix that however I was not able to fix that. I got this link http://www.printer-techsupport.com/Canon-printer-support.htmlover the internet. I just visited and made a call on their toll free and got instant help for my printer.

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon pixma – ink absorber almost full
ANSWER : They are on the bottom of the printer. If you want to clean them, you can take them out and wash them in hot tap water. Wring them out like a sponge. You will need to reset the printer. http://jezpinions.blogspot.com/2012/03/canon-mg6150-ink-absorber-reset-error.html

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Canon iP1700 ink absorber reset and remove/clean
ANSWER : The 6 step directions about tank full error worked perfectly for me to correct the problem

Read Full Q/A … :

Canon Bubblejet (BJ) 5

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))

Read Full Q/A … :

Canon Bubblejet (BJ) 5

HelpMe: Canon pixma ip 4300 won't turn on
ANSWER : A few years after last comment. Same problem. Nothing seems to work. Does anyone have a foolproof answer?

Read Full Q/A … :

Canon Bubblejet (BJ) 5