Lexmark Optra S

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Place the smart chip against the pins on the reset device. A red light will flash to show you that the chip is engaged. When the light turns green, usually six or seven seconds later, the cartridge chip is reset and ready to use.
It is a simple process to activate the unsupported Lexmark cartridge override: Hold down the green button* and the cancel (X) button simultaneously. Upon activating the override, the error message will go away and the printer will do a semi-reboot.
If this type of chip is in your toner, you will need to replace the chip when refilling your cartridge. Other chips can be reset with a “resetter,” a small plastic tool that physically connects with the cartridge chip and tells the chip to return its count of spent droplets to zero.
Cartridge chips are devices that communicate with a machine through either direct contact or RF (radio frequency). 2. They typically are mounted on a small circuit board. 3. They have memory to store information.
The information includes the number of pages printed using the cartridge, the page coverage, frequency of printing, and the printing modes used. The printer uses the NPP (number of pages printed) to calculate how much ink left in the cartridge.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Yes, in many cases you can refill ink cartridges. However, if the cartridge has dried ink inside it, don`t try refilling it as it will likely not work properly.
Installing a new cartridge is something of a rite of passage for turntable owners. It`s a skill that once was common, but now seems to be considered some kind of black art by many. In reality, it`s not such a hard thing to do provided you have the appropriate tools, a reasonably steady hand and some patience.
Printers that use two cartridges (one black, one tri-color) can print if one cartridge is empty. To continue printing, remove the empty cartridge from the printer.
Most commonly “Cartridge Problem” means that your HP printer simply cannot recognise the colour or black ink cartridges. Thankfully however this error message can usually be cleared with some basic troubleshooting.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print.
Ink is used in a number of ways throughout the inkjet printing process. In general, ink in an ink cartridge is used for printing documents, photographs and other such materials. Some ink, however, must be used to maintain the health of the print head; some ink is residual; and some ink evaporates.
cartridge, in weaponry, unit of small-arms ammunition, composed of a metal (usually brass) case, a propellant charge, a projectile or bullet, and a primer. The first cartridges, appearing in the second half of the 16th century, consisted merely of charges of powder wrapped in paper; the ball was loaded separately.
Cartridge Protection: This feature permanently associates toner cartridges with a specific printer, or fleet of printers, so they cannot be used in other printers. Protecting cartridges protects your investment.
The serial number can be found on the outer box and on the toner cartridge.
When color ink is expended and black ink still remains, you can continue printing for a short time using only black ink. However, you should replace the expended ink cartridge(s) as soon as possible. See the following section to continue printing temporarily with black ink.
Multi-Ink Printer Cartridges Explained

Multi-ink cartridges usually contain cyan, magenta, and yellow inks.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
If the color is still not coming through, let the printer sit for about 10 minutes before running a second cleaning, this allows the ink to soak on the printhead. It might take a couple of cleanings to get a cartridge properly primed, especially if the printer has been sitting for a while.
Why the Printer Cartridge won`t Move. A paper jam is usually the reason why an HP printer cartridge gets stuck on the right side. Pushing the paper excessively into the printer, on the other hand, is the most common cause of a paper jam. You should only push the paper until the first resistance.
Unplug the printer from the wall socket, use a lint flint-free and try and wipe clean the carriage path / paper path thoroughly inside the printer. There might be very small debris or dust particles which might be causing slight issues for the free carriage movement.
Push down on the cartridge to detach it and then pull it out at an angle from the point of attachment. Lift the flap holding the cartridge in place to detach it. Then remove the cartridge. For large inkjet cartridges press the release tab on the front of the cartridge.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

info on refilling lexmark 16 cartridges?
ANSWER : Our proven track record includes 20 million cartridges sold since 2004, saving $180 million for our customers who would have otherwise bought new cartridges. Unlike many discount cartridge resellers, Inkplicity is a manufacturer, instead of only a distributor mail order firm. By eliminating the wholesaler and maintaining complete control of our cartridges from product design and development to your doorstep, Inkplicity continuously delivers extraordinary savings and quality to you. For more info -Refilled Cartridges

Read Full Q/A … :

Lexmark Optra S

Lexmark X4650 paper Jamming!!
ANSWER : Well I had two printers that had similar issues – misalignment of paper feed which rendered both printers useless. I shook the Lexmark x4650 a couple of times and then plugged it in and got new paper and voila the misalignment was gone and it actually fed paper like it used to and printed it too.

Read Full Q/A … :

Lexmark Optra S

Lexmark X466 empty tray
ANSWER : The “Load Tray 1 with A4 paper” means the printer is looking for A4 size paper in Tray 1 and that is not what it is detecting. You need to make sure that the paper size that is in the tray matches what the printer is expecting so it understands that it should be looking for a specific size of paper. If you are printing on regular Letter size paper – set the printer tray to Letter instead of A4 and message should go away.

Read Full Q/A … :

Lexmark Optra S

Lexmark paper feed problems
ANSWER : On my X204n Lexmark laser printer, it was doing the same thing you described – basically sounded like it was trying to pick up the paper from the tray and then failing after several seconds. When you’d open the paper tray, the paper looked like it had been partially taken up with some black scuff marks on the paper that lined up with the rollers that take up the paper. I inspected the rollers and although they looked a bit smooth and worn, didn’t seem like they should be a problem. However, this particular model has just a rubber tire almost like a car tire – the rubber can come off the hard plastic wheel on the inner portion. So I popped off the two rubber “tires”, turned them inside out and put them back on. When turned inside out, the rubber looked nice and … rubbery and had a lot more grippy feeling to them. The very first printing attempt after that and the paper sucked up perfectly with no problems. I think the problem is solved! So if you have similar “tires” that take up the paper, try flipping them and see if it works for you too.

Read Full Q/A … :

Lexmark Optra S

Lexmark Printer Problems
ANSWER : lexmark printers can be fixed . just follow the steps . uninstall the printer and drivers and install the printer driver and setup again from lexmark and than make sure you internet password and you are all set to go for more visit http://lexmark.technical-care.com/ and i hope this will help you . thanks

Read Full Q/A … :

Lexmark Optra S

Lexmark T654dn power supply problem
ANSWER : Maybe this Thread may be of use:

Read Full Q/A … :

Lexmark Optra S

Restore settings Lexmark x466
ANSWER : Try this:

Read Full Q/A … :

Lexmark Optra S

Haze and Toner Spots (Lexmark C748de)
ANSWER : Addendum: (continuing the last sentence of my problem description):

Read Full Q/A … :

Lexmark Optra S