How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
An Er/04, Er/05, or Er/06 error message indicates paper is jammed inside the printer. To resolve the issue, find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper. For detailed troubleshooting, go to Paper Jam Error.
Check the printer connection status: Make sure the wireless signal is on, and the printer is connected to the same network as your computer or mobile device. If your printer has a light next to a Wireless icon or button , make sure the light is on. If it is off or blinks the printer is disconnected from the network.
Requirements: Operating System – Windows 7, Windows 8, Windows 8.1, Windows 10.
Status unknown means a circumstance where samples were scheduled to be taken by the regional water quality control plant and were not, samples were taken but not yet analyzed by the report due date or where a new discharger has yet to be sampled.
If the LabelWriter appears as Unspecified or Unknown in Devices and Printers on Windows, it usually means that the computer has not identified that device as a printer yet.
Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover.
The credit card declined code 04 means: Pick Up Card (No Fraud). When you receive declined code 04, it means the card has been reported either lost or stolen, but not flagged for fraudulent use. The cardholder should contact their issuing bank for more details.
If your printer is compatible with Windows 10, download and run the Print and Scan Doctor to detect and fix isses. If problems persist, reinstall the latest HP printing software. Download and Install the latest HP printer software and driver.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
Go to the Start icon on the bottom left of your screen then choose Control Panel and then Devices and Printers. Right click the printer in question and select “See what`s printing”. From the window that opens choose “Printer” from the menu bar at the top. Select “Use Printer Online” from the drop down menu.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP 4L Printer Paper Jam
ANSWER : The paper jam pointer flashes after the printer sustained the second sheet of paper a couple of centimeters into the machine. The main page in the wake of driving on the printer after some time dependably gets printed, yet it gets stuck at all after pages.
Dead HP 4L
ANSWER : My old HP 4L didn’t power up after I had to shut it down for a couple of weeks. Not lights, no fan … my nice old clunky Laserjet dead?
evenly spaced horizontal lines on hp laserjet III printout
ANSWER : The lines would be a toner cartridge problem. Which paper tray? The MF tray or the optional paper cassette?
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
How to copy a card slot in HP laserjet 4250N
ANSWER : None that I know of, using a computer is likely your best option but I never attempted it.
What repair needs to be done for a "50 needs repair" message on an HP Laserjet IIIP?
ANSWER : I don’t know what you mean by good toner cartridges. They haven’t been built in about 10 years, so if they are new OEMs in the box, they are guaranteed to fail. The 50 error on that printer is mostly a burned out fuser lamp. This site was sold, so as you can see, there are no more kits available.
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
LaserJet 4 won't Power Up
ANSWER : I haven’t seen that particular behavior on that model. It either works or it doesn’t. My first choice would be the power supply.