Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The Konica Minolta deletion error usually occurs when the user is trying to print or scan a document. The most common causes of the error message “Deleted Due To Error” are either an incorrect configuration of the system settings, or faulty entries in the Windows registry.
Trouble Code C-0202 (Tray 1), C-0204 (Tray 2), C-0206 (Tray 3, where fitted), C-0208 (Tray 4, where fitted) is usually caused by paper stuck behind the relevant paper tray. Step 1 – Empty Paper from the relevant Tray AND the Tray below it.
Resolution: This error code indicates that the device cannot detect the position of paper stacked in the Large Capacity Tray (LCT), typically Tray 3. This is most often caused by improperly loaded paper in Tray 3.
To view detailed information for troubleshooting purposes, you can configure settings so that the error code is displayed simultaneously. In the administrator mode, select [Maintenance] – [Network Error Code Display Setting], and set [Error Code Display] to [ON] (Default: [OFF]).
What is the default Admin password for a Konica Minolta bizhub? The default Admin password for a Konica Minolta bizhub is 12345678, for newer models it may be 1234567812345678.
2236 The certificate has expired, or the validity period has not yet start- ed. 2238 The CN field of the certificate does not match the server address. 2239 The certificate does not have the expected usage. 2240 The certificate is not trusted.
Failed exposure lamp or Inverter board. Replace Exposure Lamp (p/n A03U M301 01) or Inverter Board (p/n A03U M405 00) as necessary.
Reset. Resetting the printer stops printing and clears the current print job received from the active interface. You may want to reset the printer when there is a problem with the print job itself and the printer cannot print successfully.
It`s a pretty simple process:

Unplug the power cable from the wall outlet. Wait 15 seconds. Plug the power cable into the back of the printer. Plug the printer back into the wall outlet.

Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
In the administrator mode, select [Security] – [Administrator Password Setting], and enter a new administrator password (using up to 64 characters, excluding “). The administrator password is set to [1234567812345678] by factory default. Try this password if the administrator password has not been changed.
In the administrator mode, select [Security] – [Administrator Password Setting], and enter a new administrator password (using up to 64 characters, excluding “). The administrator password is set to [1234567812345678] by factory default. Try this password if the administrator password has not been changed.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error code sc27-04
ANSWER : Sorry the code is sc27-04

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :
Unknown Printer

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :
Unknown Printer

Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :
Unknown Printer

printer error code unable to print 4f
ANSWER : Follow these instructions:

Read Full Q/A … :
Unknown Printer