Konica-Minolta Bizhub 350
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Here are the most common causes of a printer printing faded text or images: Low ink or toner levels. Toner sticking to the fuser roller or problems with the transfer roller. Low ink or toner density settings.
If you are using a USB connection, make sure that the cable is properly connected. If your printer is connected via wireless network, verify that the wireless connection is working. If all seems fine, restart the printer and try again. If the Konica printer is offline, the error can be caused by faulty printer drivers.
A common cause of faded, faint printouts from your inkjet printer is dried ink particles causing a blockage in your printer. The printheads on an ink cartridge can be become blocked if the printer is not used for a period of time, so it is recommended to print a few pages each month to maintain the print quality.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
CMYK and RGB are acronyms that refer to color models used to create images and files. CMYK color mode is used for printing. The RGB color mode is used to display images that are intended to be viewed on computer monitors and screens only.
[Select Color] Select colors for printing. [Auto Color]: The color mode is automatically selected according to the original color. [Full Color] (PS only): The original is printed in full color regardless of whether the original is in color or in black and white.
Check the ink levels
Sometimes, the printer may not print black ink because it is low or empty. You can check the ink levels on the printer`s display, or by using the software that came with your printer. If the ink level is low, replace the cartridge or refill it according to the manufacturer`s instructions.
Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
Incorrect heat settings
If the heat settings are too low, the opposite will happen and you will have a faded image. Having the correct heat settings will make sure that your label is printed correctly, and remove potential problems in scanning and reading barcodes.
When designing for a printed format, the best color profile to use is CMYK, which uses the base colors of Cyan, Magenta, Yellow, and Key (or Black).
If a fuser unit is not heating the toner powder correctly, ghost images can appear when printing. You can check to see if the fuser unit or drum unit is causing the ghosting by having a look at the ghosted images.
In the [Advanced Settings] dialog box, select [List of Settings] [Toner Density] [Adjust] → click [Details]. Adjust the density for each color → click [OK].
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
blue line on printing
ANSWER : Replace the cyan toner cartridge.
Read Full Q/A … :
Konica-Minolta Bizhub 350
Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.
Read Full Q/A … :
Konica-Minolta Bizhub 350
when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?
Read Full Q/A … :
Konica-Minolta Bizhub 350
Paper jam in front of print head. HELP URGENT Please
ANSWER : I am 99% sure you don’t have a problem with a sensor. Having no idea what you do in the cleaning process, and not being able to look at the printer, there is no way to help or advise you.
Read Full Q/A … :
Konica-Minolta Bizhub 350
Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.
Read Full Q/A … :
Konica-Minolta Bizhub 350
Faint printing with gaps
ANSWER : Don’t know what you mean by cleaned the nozzles. If you used the printer function to do that, it was a waste time and ink. You should buy a printhead cleaning kit off of eBay and do it right.
Read Full Q/A … :
Konica-Minolta Bizhub 350
Paper Jam when printing color.
ANSWER : I have also this problem. I just bought a new color printer. Installing was fine, and had printed one page of a print test on the first setup, but when it started to print the second page, the paper jams. I am a tutor at DissertationHelp.uk and I also want to solution in this problem.
Read Full Q/A … :
Konica-Minolta Bizhub 350
Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.
Read Full Q/A … :
Konica-Minolta Bizhub 350