Epson Stylus C86

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

A1: When an Epson printer is in an error state, it indicates that there is a problem or issue preventing the printer from functioning properly. It could be due to various reasons such as paper jams, connectivity issues, software conflicts, or low ink levels.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
Some of the most common printer problems that most of us have experienced include paper jamming, slow printing, uneven printing, and wrong colour output. If you use your printer frequently, we know how annoying it can be to have persisting problems with the printer.
Solutions: Check if MAC address filtering is disabled. If it is enabled, register the printer`s MAC address so that it is not filtered.
Turn off the printer. Wait at least 5 seconds, then turn it back on. If the error message still appears, write down the error number listed in the LCD panel (Cffff/Eggg), turn off the product, unplug the power cord, then contact a qualified service representative.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Method 1 – Bypassng Ink Cartridge on Epson Printer

After opening the lid, hold the ink button down. When you find the ink holer is moving to its position, then open the cartridge`s lid which is having no ink. Close it again without removing the cartridge. Close the lid and start to print.

The contacts in your printer or cartridge are damaged or dirty. The printer`s memory is not reset. It`s still reading the data from the previous chip. The printer has not been used for long, causing the cartridges and their metal contacts to dry.
The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

If the ink level is sufficient, but the printer still does not print black ink, you may need to run a cleaning cycle. A cleaning cycle is a process that cleans the printer heads and removes any clogged or dried ink.
Click or double-click the Printers, Printers and Fax, or Devices and Printers icon. Right-click the printer you want to test and select the Properties or Printer Properties option. If you do not see your printer listed, your printer is not installed. In the printer`s Properties window, click the Print Test Page button.
Errorcode E06 occurs because of a Fault with the heating circuit. This can only be eliminated by an experienced engineer.
An E5 or E6 error occurs when the scanner or printer is in an error state. Reset the printer. With the printer on, disconnect the power cord from the printer. Unplug the power cord from the power source.
The Error Code 6 means that there was an issue communicating with the Google Play app on the phone (various possible reasons). 1) Reboot the device and try the purchase again.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Using EPSON StatusMonitor

EPSON StatusMonitor monitors the printer. If it detects a printer error, it will inform you with an error message. When the ink runs low or out, a How to button appears. Click How to, and EPSON StatusMonitor will lead you step by step through the ink cartridge replacement procedure.

It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson c86 – service required – counter reset
ANSWER : you have to use the ink overflow reset utitlity. “EpsonIPRUtitly_A10.exe” This works on my C-86 when it is plugged into LPT1 and my system is WinXP (wont work in Win98). I have the file. BUT before that you must do something about the ink overflow tray.

Read Full Q/A … :

Epson Stylus C86

Epson printer can't recognize Epson ink cartridge
ANSWER : Hi, my name is Jim.

Read Full Q/A … :

Epson Stylus C86

EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!

Read Full Q/A … :

Epson Stylus C86

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus C86

Weird Problem: Epson R2400 Printer won't power on
ANSWER : I just had exactly the same thing happen. The printer is usually on, but now is off and will not power on. Anybody know what is going on? Is there a fuse blown? Where would that fuse be?

Read Full Q/A … :

Epson Stylus C86

Epson Stylus C64 in problems, Help!!!!
ANSWER : a lucky tip – if all else fails and you don’t have a PC instead of a Mac, try what I did on my C63. When the head finished moving and both red lights flashed with a “general error’ message, turn off the printer power supply and physically slide the head from its rest position to the far left of the printer. This seems to re-set the “foreign body” trigger. Turn the power back on, the head slowly moves back to the rest position and hey presto the lights have stopped flashing and the printer works! Sounds clumsy but you have nothing to lose trying it, the cost of repair exceeds the value of a 10 year old printer.

Read Full Q/A … :

Epson Stylus C86

Need help for cleaning epson r300, have a kit
ANSWER : Don’t worry about the paper towel. Keep the heads as far to the right as you can and the fluid will just go into the waste sponge underneath. There’s nothing you can damage with the fluid. I wouldn’t worry about the pad that got torn. Just insert the syringe in the nozzle and gently push the fluid down into the heads. This site sold tens of thousands of those kits and I guess the instructions were pretty good because there was never a single complaint.

Read Full Q/A … :

Epson Stylus C86

Epson Stylus Pro 9800 Service / Repair Materials
ANSWER : service call error 00010005 . how to solve?

Read Full Q/A … :

Epson Stylus C86