HP PSC – Printer / Scanner / Copier 2410
My printer says I need to remove and check printer cartridges and I have done this several times but it still is not printing.
Experienced technical support provide their insights in answering this question :
The contacts between the cartridges and the printer may need cleaning; the cartridges may be low but not out; or there could be a job stuck in the print que.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
If you wait several minutes and it continues to blink, turn the printer off, then back on. If it will not turn off, unplug the power cord from the back of the printer. Unplug the power cord from the power source. Wait 30 seconds, then plug the power cord back into the power source.
Some parts of the printer are broken, or there`s an internal error with the device. You need to restart your printer if you notice the `Resume` light and the Power light blinking together. There`s an improper connection. A flashing `Resume` light can also indicate a paper jam.
Ink in a cartridge is low. You can continue printing, or check which cartridge is low and replace it. An ink cartridge is expended or not installed correctly. Replace or reinstall the cartridge.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
Ink has run out. (The lamp on the ink tank flashes.) If printing is in progress, stop printing, replace the ink tank, and then print again. Printing under the current condition may damage the printer.
Yes, if the computer is sleep or standby mode it is normal for the power light LED to flash, or blink. This lets you know the computer is still on, and that it`s in a power-saving mode. If your computer is in this mode, press any keyboard key or button on a mouse to exit power saving mode.
Open the printer`s web page and Sign in as Administrator. On the General tab select Reset Factory Settings in the menu.
Restart your computer, and then immediately press the F11 key repeatedly. Click Start . Press and hold the Shift key, click Power, and then select Restart while holding the Shift key.
Turn the printer off then back on. If the issue persists, turn the printer off, unplug the power cord and then wait at least three minutes before plugging the power cord back in and turning the printer back on. If the issue persists, ensure the product is running the latest firmware available from HP.com.
Open HP Smart app, click your printer, click Printers in the top menu bar, and then click Diagnose & Fix. Follow the instructions if any issues are found. If you still can`t print, remove and re-add the printer.
The Wireless light blinks when the printer is attempting to connect to the wireless router or access point. Wait a few minutes, and then check the light again. If the Wireless light is on and steady, the printer is connected and you can stop troubleshooting.
The error indicates embedded controller has timed out waiting for the BIOS to return from system board initialization (end of POST). The blinks indicate system board failure on your PC.
When the printer starts blinking orange light, then there might be some issues with the printer cartridge, toner, or simply there are some corrupted configuration settings. You need to contact the proper HP support & maintenance team to check the exact cause of this problem in your system.
The orange exclamation point usually indicates one of the following issues has occurred, Insufficient power, There is a paper jam in the printer. The top cover is open. No paper was loaded in the tray or the tray was not loaded properly.
Check the output of the AC adapter. If it is bad then it appears the battery has fully discharged and you need a new AC adapter.
The orange exclamation point usually indicates one of the following issues has occurred, Insufficient power, There is a paper jam in the printer. The top cover is open. No paper was loaded in the tray or the tray was not loaded properly.
Check the output of the AC adapter. If it is bad then it appears the battery has fully discharged and you need a new AC adapter.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
flashing printer lights
ANSWER : The contacts between the cartridges and the printer may need cleaning; the cartridges may be low but not out; or there could be a job stuck in the print que.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
Flashing Lights & no display
ANSWER : Since it’s kind of old and there aren’t any parts available, you should probably go looking at replacement models. Saw a similar model (Canon) at Walmart’s this week that was wireless for $49.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
All panel lights blinking, printer doesnt respond
ANSWER : This is very easy process, you must change a new one
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
My epson wf-3640 has two flashing blue lights going and will not print on command?
ANSWER : I think it is illicit anticompetitive behavior both quick essay service here in Australia and likely in different purviews too for them to look to cripple non specific ink use – and now it turns out it impairs their own particular ink and printer as well.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410
HP Laserjet printer page counter backward move
ANSWER : On all HP laserjet printers if you power them off the page count will decrease back to the nearest 10. For example, if the page reading is 123,799 and you power it off, the page count will go back to 123,790.
Read Full Q/A … :
HP PSC – Printer / Scanner / Copier 2410