HP LaserJet 5+

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

An Er/04, Er/05, or Er/06 error message indicates paper is jammed inside the printer. To resolve the issue, find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
Er/05 displays, the Attention light blinks, and the Paper light is on. Paper is jammed in the imaging drum area. Open the printer, remove the imaging drum, clear the jam with both hands, replace the imaging drum, and then close the printer. For more information, go to Er/04 or Er/05 Displays (Paper Jam).
When a Scanner Error 6, Scanner Error 12, Scanner Error 100, Scanner Error 200, or Scanner Error 300 is displayed on the HP LaserJet M1005 control panel, it indicates a scanner error that cannot be resolved by turning the printer off and then back on, nor resetting the printer to factory defaults.
Error code E05

This error code may cause an orange light on your machine to blink 5 times and is caused by the print head not being installed at all or it may have been installed incorrectly.

This error can sometimes occur even when you`re not trying to print, or if you don`t have a printer installed. To overcome this issue, the first thing to check is to make sure you have the latest printer driver installed for your printer.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
System Error Code 05:10 indicates a Formatter or HPGL/2 Card failure.
This indicates a paper jam in the Input tray area. The Attention light blinks, the Paper light is on , and the control panel character display alternates between Er and 05. This indicates a paper jam in the Imaging drum area.
The “Scanner error 5” usually triggers when the scanner`s drive motor fails. Fortunately, replacing the scanner assembly (which includes the motor) is not considered difficult. Our installation instructions are available below. Click here to purchase a replacement scanner assembly.
An E5 or E6 error occurs when the scanner or printer is in an error state. Reset the printer. With the printer on, disconnect the power cord from the printer. Unplug the power cord from the power source.
Fix 5: Change User Account Control Settings

The User Account Control (UAC) may block you adding new program/software. Therefore, you should turn it off in order to avoid system error 5. Type UserAccountControlSettings into Windows search box. Select UserAccountControlSettings from the result or just hit Enter.

It`s the equivalent of an “Access is denied” error. If you try typing a command like “net user,” which requires elevated (administrator) access, you`re going to see the system error 5 message. This message can occur even when you believe you have administrator rights on the computer.
A 05:10 error on the front panel of the printer indicates a formatter card failure. This issue usually does not require on-site service, as the formatter card is a user-replaceable part. It is a simple fix. The card is located on the back side nearest the power cable plug.
If the error code 33.05 is displayed once inserting the eMMC and or replacing the Printer`s Formatter, an updated firmware must be performed. The printer may broad cast this error along with the “Security Alert” message.
If Error 05 or Error 07 appears on LCD or there is an ADF PAPER JAM error message, the scanner might require service.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

printer error fix
ANSWER : Epson 2540

Read Full Q/A … :

HP LaserJet 5+

How to fix error code B200
ANSWER : There’s lots of forum posts dealing with the B200 error. http://www.fixyourownprinter.com/posts?utf8=%E2%9C%93&q=b200

Read Full Q/A … :

HP LaserJet 5+

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

HP LaserJet 5+

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :

HP LaserJet 5+

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :

HP LaserJet 5+

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :

HP LaserJet 5+

how to fix it
ANSWER : Usually, that is an error 46. Try the solutions on this thread. Hopefully it will go away.

Read Full Q/A … :

HP LaserJet 5+

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

HP LaserJet 5+