Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The quick answer is: Yes, you can (if you own a printer model that allows it) — but you shouldn`t keep printing with an empty cartridge for too long. Why? Because running on an empty cartridge for too long can cause your printhead to overheat resulting in irreversible printer damage.
The contacts in your printer or cartridge are damaged or dirty. The printer`s memory is not reset. It`s still reading the data from the previous chip. The printer has not been used for long, causing the cartridges and their metal contacts to dry.
Most commonly “Cartridge Problem” means that your HP printer simply cannot recognise the colour or black ink cartridges. Thankfully however this error message can usually be cleared with some basic troubleshooting.
Black Print Mode allows you to print only with black ink as a temporary emergency measure to minimise the down time in the event any colour inks are expended, even if there is no replacement cartridges available.
How Many Pages per Ink Cartridge On Average You Can Print? How many pages can you print with one ink cartridge? According to PCMag, a standard ink cartridge will print an average of 220 pages, (with 11 ml of ink). A high capacity cartridge prints an average of 350 pages, (its tank holds 16 ml of ink).
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
Printer cartridges can be replaced on an as needed basis! If one cartridge is running low, you do not have to replace the other colors at the same time. However, you do need to have all of the printer cartridges installed in the printer for it to work.
The most common reason a refilled ink cartridge does not work is that you didn`t reinstall the cartridge properly. Check the cartridge and make sure it is not dislodged or misaligned. If there is no visible sign of misinstallation, remove the cartridge and reinstall it.
You can continue to print with one or more empty cartridges, but HP recommends replacing them as soon as possible to avoid printhead damage.
You can only install two black ink cartridges if your printer uses two different types of black ink. If you are trying to install a black ink cartridge in a color cartridge slot, your printer will not function and you could potentially cause damage to the machine.
The single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage. During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the computer.
A series of Canon printers allows users to continue printing on a single button press. User can hold down Stop/Reset/Resume for five seconds and then release it. By doing so, you can continue printing regardless of the low or empty cartridge estimate.
Print In Single Cartridge Mode

For instance, the HP ENVY series allows you to print in single-cartridge mode. When it comes to printing a single color i.e black, you can perform your printing activity by simply removing the tricolor cartridge and letting your printer default settings to use only black ink.

If your machine`s cyan, magenta, or yellow toners run out, you can choose Mono in the printer driver to allow you to keep printing. You`ll be able to keep printing until the black toner runs out.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My printer feeds through one piece of paper all the way and then a half piece of paper and stops. I pull out the paper to stop the paper jam and then it prints but sounds rough. After printing, it doesn't feed the paper all the way through.
ANSWER : And the first 2 sheets, the full and half sheet that go through first, are blank.

Read Full Q/A … :
Unknown Printer

Prints blank pages, won't print from computer
ANSWER : Don’t know why you replaced the fuser, but assuming you had print before, then it must have been something you did during the procedure. Only thing I can suggest is to recheck your work. Just because you reinstalled a connector doesn’t mean that it is seated firmly enough to work. Any flat ribbon connectors that you removed and reinstalled, check to see that the contacts are all flat and not peeled back.

Read Full Q/A … :
Unknown Printer

black cartridge not printing
ANSWER : https://www.youtube.com/watch?v=thrZtvAhKm0

Read Full Q/A … :
Unknown Printer

when printing front and back, the front will print well but the back will fade
ANSWER : It happens because second side voltage is much higher and the board breaks. Are you getting this issue in auto duplex only, or same error you are getting when you print second side manually?

Read Full Q/A … :
Unknown Printer

Print file sent but no printing occurs
ANSWER : Been working on these since they first were released. Never seen a problem like yours. If it happens again, try doing an engine test, as it bypasses the formatter board. The engine test is located at the right side of the manual tray opening. Look for a hole in the side wall. Stick something like a paper clip into it to actuate the test button. It will then print a lined test page. If it does that, then it points to the formatter board as the cause of your problem.

Read Full Q/A … :
Unknown Printer

Expired Ink Cartridges – Any way to move paper with old cartridges?
ANSWER : You could try disconnecting the printer from the computer. Then change the date on the panel to prior to the expiration date. That should fool it.

Read Full Q/A … :
Unknown Printer

Chatter from toner cartridges before printing
ANSWER : The video may have the answer you want

Read Full Q/A … :
Unknown Printer

My Printer Refuses to Print Due to a Refilled Cartridge
ANSWER : What printer model you have?

Read Full Q/A … :
Unknown Printer