Canon Pixma MP470
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Paper is jammed or there`s an object inside the printer.
Check for physical damage on the cartridge. Look at the print cartridge and see if there are any cracks, tears or missing elements. Any one of these can cause a failure. In these cases, you will need to purchase a new cartridge and start the refill process again after it has run out.
Description. The error U051 / U052 indicates that a communication issue with the print head has occurred. This can be caused either by the print head not being installed properly or a hardware failure.
Solution. There are several reasons for Error 5100 to appear, including a paper jam, an improperly seated ink tank, and more. Encoder (Timing) Strip on the printer needs cleaning. Manual cleaning can be done on some models.
The 5100 error may indicate that an ink tank(s) is not seated properly, paper is jammed or there is an object inside the printer, the printer needs to be reset or the encoder film/strip may need to be cleaned.
Ink tank has not been properly recognized.
Fix: Canon MX870 Error Code U052
If there is an issue with the print heads, then you may encounter the error U052. You may also experience this error code if you have installed the incorrect print head on your printer. 2. To resolve this issue, you need to install the correct printhead in your printer.
This means the slicer knows how much of a buffer to allow when planning the printing path of a model, particularly if you`re printing multiple models one at a time. In other words, the printhead settings ensure that the printhead doesn`t collide with the previously printed models.
Check the following: Make sure print head holder motion is not impeded by tapes for securing the print head holder during transportation, jammed paper, etc. Remove any impediment. Make sure the ink tanks are properly installed.
Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE cartridge holder from moving, and turn on the machine again. If the problem is not resolved, contact the service center.
Check the following: Make sure print head holder motion is not impeded by tapes for securing the print head holderduring transportation, jammed paper, etc. Remove any impediment. Make sure the ink tanks are properly installed.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.
Read Full Q/A … :
Canon Pixma MP470
Canon Pixma MX870, Error 6000 and Service Manual
ANSWER : Brand new MX922. Printed a couple of pics and now the 6000 error. Can’t see any obstruction. Could you provide the manual for dismantling the unit further? Or pointers for getting further into the box than just looking through the little folding inkwell door?
Read Full Q/A … :
Canon Pixma MP470
Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.
Read Full Q/A … :
Canon Pixma MP470
Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html
Read Full Q/A … :
Canon Pixma MP470
Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.
Read Full Q/A … :
Canon Pixma MP470
Canon Pixma MX882 won't print black text
ANSWER : Yeah I’m having the same problem with my Canon MX882. I’ve refilled the pigment tank, cleaned the print head and I still get no pigment black at all. I think it has something to do with the purge unit, but I don’t see any instructions on how to clean it. If I can figure it out, I’ll let you know.
Read Full Q/A … :
Canon Pixma MP470
Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))
Read Full Q/A … :
Canon Pixma MP470
Canon MP530 – Head Alignment Error
ANSWER : Hi Trigger, can you please let me know how this was resolved as I have a similar problem.
Read Full Q/A … :
Canon Pixma MP470