Print a Configuration page. That will tell you what size paper Tray 2 thinks it has in it. If it doesn’t have plain letter on the page, then it will ask to print from Tray 1.
How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
59. F0 Error is displayed when primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate or because the SR9 sensor (the primary transfer-roller-disengagement sensor aka Sensor K) has gone bad.
IP ADDRESS: 192.0. 0.192.
If you see the error message “50.2 Fuser Error” on your HP Color LaserJet CP2025 series printer, you probably need to replace the fuser. Fusers are a consumable part and it is expected over the life of the printer you will replace the fuser several times.
Description: Printer boots up to 59. F0 Error and is unable to print. This error is primarily caused by one of the following conditions: A transfer alienation failure in which the ITB is stuck and unable to properly engage the internal transfer rollers.
The 59. F0 Error can be eliminated by resetting the toner and the fuser assembly. You may also try revitalizing your HP device. In addition, you can check for any issue in the fuser motor as well as the internal motor.
Right-click on the printer icon and select `properties` from the menu. Find the `general` tab within the properties menu and then look for the `location` field. The numbers that appear to the right of this field make up your printer`s IP address.
The message `Fuser Error` or `Self-Diagnostic` means either the fuser has reached the maximum temperature allowed or there has been an error in detection of the correct temperature during specific times of the printing process.
41.02 error on this printer is a laser/scanner error. If the message does not clear, then you need to replace the laser/scanner. If you are not getting a 41.02 error, then report back with the correct number. The 05 does not mean anything.
Error 0x0000011B is a common issue on Windows systems and can have various causes. Here are the most common causes and how to resolve them: Driver conflict: This happens when two drivers access the same resources at the same time. To resolve this issue, check for any conflicting drivers and update or disable them.
Apparently, a bad toner cartridge can cause error 59.00. 30, but replacing the toner combined with: removing the fuser and putting some oil on the axis at each end (and turning the gear several revolutions), cleaning the paper path and rollers solved the problem.
F0 Error and is unable to print. This behavior may be caused by one of the following conditions: • Transfer belt is broken and cannot properly engage the internal transfer rollers. Sensor SR17 (primary transfer roller disengagement) is dirty or bad.
This is a ITB motor rotation error. Take out the ITB (Intermediate Transfer Belt) and check it for any damage.
Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on. Release the Resume button. The Attention and Ready lights cycle while the product restores factory defaults.
Click on “Wi-Fi network” in the taskbar. Select the network you`re connected to. Click on “Properties.” Scroll down to the bottom of the window — your IP will be shown next to “IPv4 address.”
In the Devices and Printers window click on Add a printer. Choose “Add a local printer or network printer with manual settings”, then click Next. Select Create a new port and choose Standard TCP/IP Port, then click Next. Under Hostname or IP address: Type in the IP address of the printer you intend to connect to.
What is an IP address (Internet Protocol address)? An Internet Protocol (IP) address is a unique numerical identifier for every device or network that connects to the internet. Typically assigned by an internet service provider (ISP), an IP address is an online device address used for communicating across the internet.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
That error code indicates a failure of the yellow laser scanner. Unplug and leave for a few minutes, also make sure you are plugged directly into the wall and not into a surge protector.
a 52 Scanner error indicates the laser/scanner which writes the image to the drum has malfunctioned. This is a hardware error and most times the actual laser/scanner assembly needs to be replaced.
59 error could be a bad motor or Developer motor rotation error. Remove all toner, power cycle the printer, and re-install one at a time, closing the access door each time before inserting another. See if one of the supplies seems to trigger the error.
59 error could be a bad motor or Developer motor rotation error. Remove all toner, power cycle the printer and re-install one at a time, closing the access door each time before inserting another. See if one of the supplies seems to trigger the error.
On your Color Laserjet CP3525`s control panel, press the Menu button. Press the down arrow button until CONFIGURE DEVICE is highlighted. Press the OK button to enter your HP`s configuration menu. Press your printer`s down arrow button until RESETS is selected.
Now you can reset the New Transfer Kit setting … At the control Panel, press the Home button. Open the “Administration” menu, then choose “Manage Supplies”. Select the “Rest Supplies” option, and then choose “New Transfer Kit.” Use the Down Arrow button to highlight the word “Yes”, and then press Ok to select it.