HP LaserJet 1200
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
HP 1100, 1200 – While the printer is on, press and hold the Go button for 5 seconds. This will reset the printer.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
An E1 or E2 error indicates the paper size setting does not match the paper size loaded in the input tray. Load the correct size paper or change the print settings, and then press the Cancel button .
A supply memory error happens when the metal contacts / chip on an HP toner cartridge doesn`t correctly connect with the corresponding contacts inside the printer. The printer cannot detect the toner cartridge and displays the `Supply Memory Error` message on the printer display panel.
A new page should print with a claim code. If the page does not print, see the email address on the printer display. The first part of the HP ePrint address preceding “@hpeprint.com” is the claim code. For example, if your HP ePrint email is “abc@hpeprint.com”, then “abc” is your claim code.
An Er/04, Er/05, or Er/06 error message indicates a paper jam. Find and clear the printer of any jammed paper, or reset the printer if the printer has no jammed paper.
Select Start , then select Settings > Devices > Printers & scanners . Scroll down to Related Settings and select Print server properties. Select the Drivers tab, and see if your printer is listed. If it is, you`re all set.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
You may see a “printer offline” error if your computer can`t communicate with your printer. This can be caused by loose cable connections or an outdated printer driver or operating system.
An E1 or E2 error indicates that the paper size setting does not match the paper size that is loaded. Remove all paper from the input tray, and then load the correct paper size. Remove any paper from the input tray. Slide the paper width guide as far as possible to the left.
An E2 error occurs when the printer attempts to print a single-page or multi-page print job, and the paper length selected in the print settings does not match the length of the loaded paper.
Look for jammed paper or debris inside the printer, and then use both hands to remove any that you find. Use both hands to remove any jammed paper or objects from the input bin. Align the cartridge with the tracks inside the printer, push in until firmly seated, and then close the toner access door.
The service manual suggests that an E7 error is a problem with the fuser. If a quick reboot does not resolve the problem then I would swap the fuser next. 1. Turn off the product or disconnect the power cord from the product.
Regardless of which you choose, all of your applications will be deleted and any settings will be returned to their default. 9. If you choose “Remove everything,” you will also have to decide whether you want a completely clean drive or if you would like to keep the laptop and you aren`t planning on giving it away.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
There is no reset button on an ink cartridge by HP either. However, the process of its resetting is similar to an entertaining game, and if done correctly, you`ll be back to printing in only a few minutes. Remove your cartridge from the printer and refill it with ink if needed.
A hard reset is a process of reverting a device back to the state it was in when shipped from the factory. That is to say, it erases all data including apps, user profiles, and settings. Hard resets can be helpful for wiping all data before selling a computer, smartphone, or tablet.
What the 0x0000011b error code means? This issue is about a printer connecting error. And it happens when a PC connects to a shared printer on another PC, which stops the printing needs.
Error 0x0000011b usually occurs when trying to print something using a network-shared printer. According to user reports, error 0x0000011b started occurring on Windows 10 after installing security updates KB5005568, KB5005566, and KB5005565, which are aimed at protecting from Windows Print Spooler Spoofing.
Look for jammed paper or debris inside the printer, and then use both hands to remove any that you find. Use both hands to remove any jammed paper or objects from the input bin. Align the cartridge with the tracks inside the printer, push in until firmly seated, and then close the toner access door.
During a print job, the printer stops feeding pages, an E4 error displays and the Resume light blinks. This indicates that paper might be jammed inside the printer.
They may contain some bug fixes, which makes your device work better, safer, and more efficiently. Every well-known printer manufacturer releases firmware updates several times a year. Yet, it`s only up to you whether to install them or not.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
HP LaserJet 1200 Early Feeding Causes Paper Jam
ANSWER : Seriously, dmzcompute, you are awesome! And this is just what the internet does so well: a specific fix for an esoteric problem, thus keeping a 15 year old machine alive another day. Thank you!
Read Full Q/A … :
HP LaserJet 1200
HP Laserjet P3005 Hangs (with error 49.4C02)
ANSWER : Just change the data cable of printer. It will be solved.
Read Full Q/A … :
HP LaserJet 1200
HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply
Read Full Q/A … :
HP LaserJet 1200
HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr
Read Full Q/A … :
HP LaserJet 1200
HP Laserjet 4250 – RFU LOAD ERROR
ANSWER : Italiano:
Read Full Q/A … :
HP LaserJet 1200
HP Laserjet 4100 Error (13.1)
ANSWER : I am pretty late to the party for this discussion but I am incredibly thankful to the person that posted this “fix” that I can barely imagine it. My 4100 had developed the dreaded paper jam described above and I had no idea what was causing it. I replaced a number of rollers only to have the same problem re-occur with no solution in sight.
Read Full Q/A … :
HP LaserJet 1200
HP Laserjet M3035xs error 13.17.00
ANSWER : If the misstep thinks of no interface join connected with the unit, pay for my research paper then most times the issue is the hard circle and it ought to be supplanted.
Read Full Q/A … :
HP LaserJet 1200
HP LaserJet 49 Error Troubleshooting
ANSWER : One must give a chance to 25dollarsupport its a Fix $ price Computer Tech support company, which is the best option in present crowded market. Quite dependable and cost effective..
Read Full Q/A … :
HP LaserJet 1200