HP LaserJet 8150N

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

This is a rotational error on a fan. This fan is the located on the left hand side (when you are facing the front) and is the one located closer to the back.
This 51.10 error code points to a failure with the laser scanner assembly, and to fix this error usually you end up replacing the laser scanner assembly. You can try turning the printer off and back on, which may temporarily reset the error and let you print a few more pages.
On the HP LaserJet P3015 P3015n and P3015dn series printers, this 51.00. 10 error code may be temporary. Try turning the printer off and back on to see if the error clears. If the error comes back repeatedly, you have a failing laser scanner assembly which requires replacement.
The 51.01 and 51.1 errors are fairly common error codes on the HP LaserJet 4100, 4100N, 4100TN, and 4100DTN series printers. This error indicates a failure with the laser scanner assembly, which is a high-failure part on these models.
The fan on the left side of the printer is not working right. Remove the top cover and the left side cover and see if the fan is turning and if not if just gummed up over the years remove the fan and clean it up to get it spinning again. If that does not work, then the fan will need to be replaced.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
57.02 Fan Error The product has experienced a problem with its internal fan.
Most generate an error code if a fan stops running (or even slows down). In a small printer with only one fan, this is a simple “57 SERVICE” error. In a larger printer with multiple fans, decimals (57.1, 57.2, etc.) are used to identify which fan has failed.
Turn the printer off, wait 10 minutes, and then turn the printer on. 2. If the message persists, reseat the fuser. If that does not work, replace the fuser.
Error 0x0000011B is a common issue on Windows systems and can have various causes. Here are the most common causes and how to resolve them: Driver conflict: This happens when two drivers access the same resources at the same time. To resolve this issue, check for any conflicting drivers and update or disable them.
57 is a fan error, check are the fans are rotating, and make sure the printer power is plugged directly into the wall socket. 57 is a fan error, check are the fans are rotating, and make sure the printer power is plugged directly into the wall socket.
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
57.02 Fan Error The product has experienced a problem with its internal fan.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP laser jet 3015 "Upgrade Error Call HP Support"
ANSWER : rgtr

Read Full Q/A … :

HP LaserJet 8150N

hp psc950 error message 'incorrect black cartridge
ANSWER : Had the same problem. Had changed black cartridge #15 as indicated but all the time I needed to change the #78 cartridge. All is working great. Message was telling me “error: incorrect cartridge installed”.

Read Full Q/A … :

HP LaserJet 8150N

hp cp1700 printhead error messages
ANSWER : a cp 1700 , it always have cyan printhead error after 6-7 pages print , cyan printhead replaced in 2 time but its not fixed

Read Full Q/A … :

HP LaserJet 8150N

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

HP LaserJet 8150N

Error message reads remove and check right cartridge
ANSWER : You can try cleaning the contacts on the back of the cartridge and the ones that they contact in the printer. Other than that, you have to replace the cartridge. I once had one that did the same thing. I swapped the cartridge with another printer of the same model and both printers worked fine. I swapped them back and the original printer got the same error. The other printer had no problem with either cartridge. I swapped them back and left them that way.

Read Full Q/A … :

HP LaserJet 8150N

HP 4050 Error 13.1 & 13.20
ANSWER : I tried the fix you recommended but it still would not fix.

Read Full Q/A … :

HP LaserJet 8150N

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

HP LaserJet 8150N

HP Laserjet 4200 50.2 Fuser error
ANSWER : if you are using a good fuser the next part to try would be low voltage power supply

Read Full Q/A … :

HP LaserJet 8150N