Dell Laser 1355CN
My printer will not change the message from Paper Jam and continue to print. There is no paper inside and I have done all the necessary checks. How do I get that message off to use the printer?

Experienced technical support provide their insights in answering this question :
Error Message reads 077-901 which means???

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Power off the printer. Press and hold ΓΌ and right arrow buttons. Turn on the printer. Press Right to “Factory Defaults” and press checkmark.
Meaning of Error Codes

Typical information is toner level and cartridge serial number. Errors 009-360, 009-361, 009-362 and 009-363 indicate that the printer is unable to read the CRUM data from the cartridge.

Remove paper from the standard bin and multipurpose feeder. Remove any dust, lint, and pieces of paper around the printer using a soft brush or vacuum. Dampen a clean, lint-free cloth with water, and use it to wipe the outside of the printer.
The printer could be dirty. Solution: Arrange to have your printer cleaned. The toner cartridge may be nearly empty. Solution: Replace the toner cartridge.
Disconnect all devices such as USB drives, printers, webcams, and media cards (SD/xD). Press and hold the power button for 15 to 20 seconds to drain the residual power. Connect the power cable (for desktops) or AC adapter and battery (for laptops). Turn on the computer.
Begin by restarting your software application. If that doesn`t work, reboot your computer. Lastly, turn off your printer for a few minutes before powering it back up. You`d be surprised how many common laser printer problems can be solved with a restart.
An E9 error occurs when the printer detects that ink system maintenance is required. An Ink System Maintenance page prints containing instructions to open and close the printhead access door to resolve the error.
Very often a 13.1 Paper Jam Message will appear, instructing the user to check Tray 2 or to check under the toner cartridge. Upon thoroughly checking the printer there is no paper jam to be found anywhere.
Why is it important to clean a laser printer? Printing is vital to all businesses so ensuring your laser printer is thoroughly cleaned is crucial as it allows your machine to continue working efficiently. Cleaning a laser printer is easy with the correct equipment, however they are prone to dust and debris.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
a misprint or misspelling in a text.
The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.
Color Laser Printer or Black & White Laser Printer

As print quality goes down over time, this will be a reason to replace the color printer. We find a black and white printer can sometimes last 10 years or more and most color laser printers are replaced every 3 to 5 years.

Resolution. Power the printer on and check for any sign of power such as Lights/LED`s/beeps/motor noises etc. If there are no signs of power to the printer, check and reseat the power cable and restart the printer. Ensure that the wall socket is working by testing the power cable in an alternative source.
Restart the computer. Turn the printer off. Unplug the printer power cable from the AC outlet or surge protector and wait at least 30 seconds. Plug the printer power cable back into the AC outlet or surge protector.
Laser printers don`t suffer from the same performance issue as inkjet printers when left idle for significant periods of time. Inkjet printers often get clogged up with dried out ink when not in regular use. Keeping them maintained requires careful cleaning.
Laser printers use toner particles electrostatically deposited on paper to produce a viewable image. To adhere these particles to the paper, all laser printers utilize a device referred to as a “fuser.” Basically, the fuser consists of two rollers and a heat lamp.
β€œ996” – Aadhaar cancelled (Aadhaar is no in authenticable status).
This error code is for the XP and XP Lite and signifies a motor fault. Below are two items to check: Your motor cable is located near the rear axle on the right side of the bike.
An E5 or E6 error occurs when the scanner or printer is in an error state. Reset the printer. With the printer on, disconnect the power cord from the printer. Unplug the power cord from the power source.
This condition occurs when one or both of the ink printheads needs attention or is faulty, incorrect, missing, damaged, or incompatible. Go to HP Customer Support, enter your printer model, and then search for Incompatible or Ink Cartridges missing error for the document on how to resolve a printhead error.
This issue may be fixed by unplugging and plugging the headset cables from the PC (making sure they are fully seated), or rebooting. If the issue persists, try connecting the video cable to a different DP port.
The event code: 13. B9. FF indicates that the printer believes there is a jam at the fuser output sensor, at power on. That means that printer has been power cycled, and the printer detects paper under the fuser output sensor while checking during the boot process.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Dell Laser 1355CN

Error messafe
ANSWER : Error Message reads 077-901 which means???

Read Full Q/A … :

Dell Laser 1355CN

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :

Dell Laser 1355CN

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :

Dell Laser 1355CN

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :

Dell Laser 1355CN

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

Dell Laser 1355CN

Scanner error keeps coming up
ANSWER : I am having the same problem with my Epson Workforce 645

Read Full Q/A … :

Dell Laser 1355CN

Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.

Read Full Q/A … :

Dell Laser 1355CN