How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Printers show up under “unspecified” when Windows cannot associate an appropriate driver. Reference this article to find drivers for your Brady printer: How to Find Windows Printer Drivers for Your Brady Printer. If you have recently installed the driver, simply rebooting your PC can resolve the unspecified status.
If the error message, Unknown device appears, this can indicate that there is not adequate power and the PC can not identify the printer correctly. Verify that there are no extension cables and that the power cable is no longer than five meters. Reseat the power cables.
Click Start on your computer, then select Devices and Printers. Right-click on the printer`s icon that did not install correctly, then select Troubleshoot. After you confirm that the printer driver for the device you want to use is not installed, select Apply this fix.
The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.
Status unknown means a circumstance where samples were scheduled to be taken by the regional water quality control plant and were not, samples were taken but not yet analyzed by the report due date or where a new discharger has yet to be sampled.
Your printer`s driver is corrupted. Your printer`s driver isn`t compatible with your system. Your printer`s driver is not up-to-date. A new Windows Update needs to be installed.
The Print Spooler is software built into the Windows operating system that temporarily stores print jobs in the computer`s memory until the printer is ready to print them. In some circumstances you may need to stop and/or restart the service.
If you see an “unknown accessory detected near you” message (or similar), it means there`s an item compatible with the Find My network that might be traveling with you. If so, its owner may be able to see your location. You should look to see if something you`re borrowing has such a device attached.
Updated: 10/11/2021 by Computer Hope. An unknown device is a device name listed in Device Manager that Windows cannot identify or doesn`t have the appropriate drivers to be recognized.
In the Services window, locate the Print Spooler service. Right-click on Print Spooler and select Stop. Minimize the Services window. Now open the Windows Settings panel, go to Bluetooth & devices > Scanners and Printer, and try to remove your printer device.
4. Click on the Security tab. Note: If the security options are grayed out, go to the start menu and launch Print Management. Go to Printers > Right Click > Properties > Security Tab, you may be able to edit the permission from that window, if not, reach out to your IT.
The error code 0x00000bcb may occur due to different reasons. For instance, the print spooler service is not working. Also, the network settings are misconfigured. Besides, the device driver is outdated or the printer queue meets an error.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.
Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.
Scanner error keeps coming up
ANSWER : I am having the same problem with my Epson Workforce 645
HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help
Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.
HP 9040 MFP Error code
ANSWER : bonsoir
Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.
52.0 SCANNER ERROR
ANSWER : Laser scanner assembly.