Unknown Printer
What does this error means: OxE3 on my Epson Wp-3540 printer.

How to Identify and Fix Common printer Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the error message, Unknown device appears, this can indicate that there is not adequate power and the PC can not identify the printer correctly. Verify that there are no extension cables and that the power cable is no longer than five meters. Reseat the power cables.
Switch off and restart the printer.

Sometimes this is all that`s needed to solve this. If there are any jobs in the queue that can`t be shifted, a restart should flush these out. Now try and print. More often than not, this should resolve the problem.

A mistake in anything that`s printed is a misprint. You might also call it a typographical error or typo.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
If you see an “unknown accessory detected near you” message (or similar), it means there`s an item compatible with the Find My network that might be traveling with you. If so, its owner may be able to see your location. You should look to see if something you`re borrowing has such a device attached.
FIX Unknown Device Drivers with Windows Update

Open Device Manager and go to the device in question in your device. Typically, it is listed as an Unknown Device in the Other devices node and expands the section. Right-click on the Unknown Device and select Update Driver.

The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.
Causes of the 0x0000011b error code

The security patches Microsoft released to protect Windows 10 and 11 from Windows Print Spooler Spoofing caused vulnerability in remote code. And the involved patches are KB5005565 and KB5005568.

The three main factors that influence the design of error messages are technical limitations, the amount of information to be presented, and what kind of user input is required.
Once your printer history is enabled, you can access it at any time from the Event Viewer. To do so, find and open the “PrintService” category and then click on the “Operational” log. A history of all Windows printer events will be listed, from initial printer spooling to completed or failed prints.
Turn the printer and camera power off, then turn on again. If the error message does not clear, contact a Canon Customer Support center for assistance. Close the cartridge cover. If the error message does not clear, turn the power off and on again.
Once your printer history is enabled, you can access it at any time from the Event Viewer. To do so, find and open the “PrintService” category and then click on the “Operational” log. A history of all Windows printer events will be listed, from initial printer spooling to completed or failed prints.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Printer error Oxc18a0201
ANSWER : Have no idea what model you have, but try this forum post or search through the site using your model and error.

Read Full Q/A … :
Unknown Printer

newly installed printer…can scan but cant be set as a default printer???
ANSWER : ITS AN EPSON L210…

Read Full Q/A … :
Unknown Printer

Difference Between Laser Printer and InkJet Printer
ANSWER : Laser uses toner which is a powder that gets melted onto the page. Inkjet uses ink that gets squirted onto the page.

Read Full Q/A … :
Unknown Printer

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

canon printer error
ANSWER : Here are the procedure to fix Canon smartbase MP730 printer error ##334

Read Full Q/A … :
Unknown Printer

PRINTER MX 320 CANON ALL IN ONE PRINTER
ANSWER : Probably a worn feed roller. You can try cleaning it with a damp rag as it might just be covered with paper dust.

Read Full Q/A … :
Unknown Printer

printer error fix
ANSWER : Epson 2540

Read Full Q/A … :
Unknown Printer

Canon i255 printer head error
ANSWER : Sometimes the print head issues are brought on not by a flawed print head but rather by a “gunky” stopping station. The stopping station is the spot where the print head “rests” when it is not printing. Generally it’s on the right half of the printer (taking a gander at the printer from the front). The stopping station has elastic seals that should encompass the print head when it’s stopped.

Read Full Q/A … :
Unknown Printer