Canon Personal Copiers (PC) 12

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

An ink tank isn`t seated properly.
Solution. If the orange light is lit and the E03 support code displays on your printer, there is a paper jam. Support codes 1300, 1303, and 1304 also indicate a paper jam.
Canon printer error: “Error e02”

Error code e02 occurs due to overheating of the printhead or when the paper is not correctly placed into the input tray and therefore the paper feed rollers are unable to pick up the paper from the paper tray.

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
If your printer displays a displays a B200 or related (B201, B202, etc.) error, this means that the print head built into one or both of the ink cartridges has overheated. You can attempt to replace the ink cartridges in your printer to resolve this.
5B02 error – ink absorber full.
The machine is unable to drain the water away

Should the error code E3 appears it is warning that the machine is not draining. You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access.

The E3 error code indicates the unit has detected there is no refrigerant. The unit will require a repair service for refrigerant to be added, please visit Request a Repair page for further assistance.
The E07 error message appears when your Canon Pixma printer detects that the “FINE Cartridge is not installed in the correct position”. A `FINE` cartridge refers to a stand alone black or tri-colour cartridge (with a printhead attached) that is used exclusively in two cartridge printers.
E, 1, 6 (LED display)

The ink has run out. Replace the ink cartridge and close the paper output cover.

If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed. SUBSCRIBE RSS FEEDS.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover. Once cartridges have been removed they can be re-install them by firmly pushing them back in until they click into place.
With the printer powered on, select Setup . Select Device settings . Scroll to the bottom of the menu list and select Reset settings.
Solution. The ECM (Error Correction Mode) is a function for detecting and correcting errors during fax communication. Using the ECM function can diminish receive errors even over poor connections. The ECM function is available only when the settings for the sender`s and recipient`s machines are enabled.
Solution. The ECM (Error Correction Mode) is a function for detecting and correcting errors during fax communication. Using the ECM function can diminish receive errors even over poor connections. The ECM function is available only when the settings for the sender`s and recipient`s machines are enabled.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Canon Pixma Printer Paper Does Not Feed Properly/"No Paper" Error Occurs?
ANSWER : Pretty much useless advice. I also have serious doubts about someone who is obviously not fluent in the English language.

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Canon Pixma iP8720 Ink Compartment Stuck
ANSWER : Here are some solutions you can try. http://fix-your-printer.blogspot.com/2013/01/how-to-fix-error-6a81-on-canon-printers.html

How to fix error code B200
ANSWER : There’s lots of forum posts dealing with the B200 error. http://www.fixyourownprinter.com/posts?utf8=%E2%9C%93&q=b200

error code 27
ANSWER : Waste ink pads full. They really aren’t as they hold a lot more waste ink than they can before they display that message. Read this thread for reset procedures.

Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048

Full Ink Tank in Canon Pixma ip4000
ANSWER : It had been exactly the same subject, could not find an appropriate broker and process for earnings finally had to rummage through the Web, and there I came across this page http://optioninvest.org .Possibly you’ll find there is a therapy to your condition, thanks for the fascination!))