How to Identify and Fix Common printer Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Re: ColorQube 8580 printer error 91, 720.00:25182
This obviously means there is a Printhead Tilt Fault.
91,721 means Printhead Tilt Fault. I suggest you look for ink spills or obstructions around the printhead, and try to remove as much as possibe, also reboot the printer.
It means there is an incorrect parameter in the paper size. This happens mostly with the wrong print driver in use, or when an application overrides the driver. So make sure it is the right print driver, and make sure that the Application is not set to an odd size.
024-747 The specified combination of parameters (stored file size, paper size, paper tray, duplex command, output tray) cannot be executed or continued. Load Paper in Trays 1-4. Make sure that the paper size, paper tray, duplex settings, and output tray settings are correct for the job.
Fault Code 027-779 occurs when the connection to the SMTP Server fails due to Authentication Failure, possibly due to an incorrect login name and/or password. NOTE: The Scan to Email Feature is only available on the Copier/Printer model.
This fault indicates that the magenta corotron cleaner is unable to clean the corotron. NOTE: Do not actually replace the Charge Corotron with a new assembly. Use the procedure as a guide to swap corotrons between 2 different color stations.
Fault Code 099-395: Fuser Motor Current Failure.
017-797 Print made from a paper tray that is prohibited. 017-798 Job type print made that is prohibited. 017-799 Single sided print made despite being prohibited. Advise the customer to set the permissions as required.
The issue is due to a recently expired certificate included with the device firmware. The loss of this communication means that the meter reads, supplies replenishment information and maintenance information has stopped being transmitted and reported.
Power the printer Off, wait 30 seconds, then power the printer back On. Replace the toner cartridge. For details, refer to Replace the Toner (Dry Ink) Cartridge.
Unable to find the SMB server during the SMB scan. Power off, check the network cable connection at the rear right-hand side of the device and power back on. Refer to Power the Printer On or Off.
Behavior – Error message on the display; the inverter does not feed current into the grid.
Fault Code 017-714 occurs when the device is unable to Communicate with the SMTP server using SSL, TLS or STARTTLS Encryption. NOTE: The Scan to Email Feature is only available on the Copier/Printer model.
Fault Code 071-104: Tray 1 Pre Registration Sensor On Jam.
Fault Code 029-716, 029-717: In Ethernet 1 Mode, Communication Time-out of the Storage Destination. URL of the PACFile proxy auto-detection function (WPAD). This Fault Code is generated when the Proxy Server is not used on the network and the device proxy server is not set to Off.
Why do you get Ricoh Printer Error Code 91? This error is caused when the auto job function cancels the printing commands. This happens due to a command error. Another reason behind the cropping of this error is when there is a mismatch between the printer`s settings and the printer driver`s settings.
Fault code 091-312 or 091-319,: Charge Corotron Cleaner Motor 3 Yelllow Fail. This fault indicates that the magenta corotron cleaner is unable to clean the corotron. Swap the corotron with another color station. For general steps on how to do this refer to How To Replace a Charge Corotron Assembly.