Canon LBP 4

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The E 0 4 error is an indication that your PIXMA TS3122 does not recognize one of the ink cartridges installed. The light should be on by either BK or CL (or both). Whichever light is lit, please replace that cartridge (or both).
Canon MP240 – Error Codes

E 0 3 = Paper Jam. E 0 4 = Cartridge is not installed correctly.

Error code 4 shows the Error message “you have been disconnected from Call of Duty, Modern Warfare servers.” and asks you to visit the Activision support page. This error is most commonly encountered while connecting to the Warzone servers.
During a print job, the printer stops feeding pages, an E4 error displays and the Resume light blinks. This indicates that paper might be jammed inside the printer. Note: Paper jams can be real or false.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed. SUBSCRIBE RSS FEEDS.
Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you`re trying to print. The loading bay for your paper might have become lodged with paper or you`re using the wrong type of paper.
An E04 error on the Smart AC Control indicates that the connection to our tado° servers failed. To fix this, please do the following: Make sure that your Wi-Fi is activated and working. To do so, check Wi-Fi access on other devices or the LEDs on the front of your router.
The error code E04 means Paper Jam. It is displayed if scan exceeds the maximum length, and cannot successfully eject the scanned document. Open the top cover and remove the document, then close the cover and try to scan again.
#404. Writing failed because the write protect switch of the memory media was enabled. Disable the write protect switch of the memory media.
Error 404 is a client-side issue indicating the requested URL can`t be found on the server. It may occur because of several reasons, such as the domain is not pointed correctly, a broken .htaccess file, or misconfigured file permissions.
It usually means data on your device needs to be refreshed, or that there`s a network connection issue. Follow the steps for your device below to fix the problem.
This error usually occurs when hls. js fails to load a manifest, for some reason.
Error 4 Logic Error – Software logic error occur when, despite the exact input from the user, a wrong output is produced. This can happen when Microsoft Corporation`s source code has a vulnerability regarding data handing.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Canon LBP 4

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :

Canon LBP 4

Canon Pixma iP3000 "Open door" Error code.
ANSWER : Look for a protruding plastic on the top that goes into an indentation. Mine was in the front left side. Put a piece of cardboard into the indentation.and close the door. The top plastic piece is not pushing the door close sensor down and because its too short and the cardboard allows the sensor to be reached and pushed.

Read Full Q/A … :

Canon LBP 4

Error code sc27-04
ANSWER : Sorry the code is sc27-04

Read Full Q/A … :

Canon LBP 4

Dreaded 6000 Error Code
ANSWER : Did you read this forum thread? http://www.fixyourownprinter.com/posts/71048

Read Full Q/A … :

Canon LBP 4

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

Canon LBP 4

Canon Pixma MP150 Error Code 5100
ANSWER : Make sure you check that a copy of Gustave Holst’s journey to the stars cassette isn’t stuck in there! haha. That’s what my error 5100 was all about, I was getting ready to dismantle the thing after threatening it with a water boarding.

Read Full Q/A … :

Canon LBP 4

printer error code unable to print 4f
ANSWER : Follow these instructions:

Read Full Q/A … :

Canon LBP 4