Unknown Printer

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

When a 99.09. 66 error is displayed on the control panel, it indicates one of the following: a hard disk drive or solid state memory drive is not installed. a hard disk drive or solid state memory drive is not connected properly.
Very often a 13.1 Paper Jam Message will appear, instructing the user to check Tray 2 or to check under the toner cartridge. Upon thoroughly checking the printer there is no paper jam to be found anywhere.
Third party ink supplies (printheads or cartridges) can commonly cause unexplained 79:04 errors. To resolve issue, replace all third party ink supplies from the printer, and replace with supported HP ink supplies.
The customer`s card issuer has declined the transaction as the card is suspected to be a counterfeit. The customer`s card issue has requested that your customer`s credit card be retained by you. The customer should use an alternate credit card, or contact their bank.
This error has the following causes and solutions: MS-DOS operating system: More files have been created in the root directory than the operating system permits. The MS-DOS operating system limits the number of files that can be in the root directory, usually 512.
When a 99.09. 67 error is displayed on the control panel, it indicates that firmware is not loaded on the hard disk drive. This is usually the result of installing a new disk or performing a Clean Disk command.
66. Something went wrong during the startup process. Go ahead and restart the Riot Client.
Error 126 is a Windows error that means “The specified module could not be found.”. During Installation: Error 126 can occur when the Windows API calls cannot add the printer driver to the system because one or more of the driver files that should be already installed are not present on the system.
In general, a 49 service error is a situation where the printer cannot process a file that has been sent. In some cases the file is corrupted and in other cases the printer`s firmware simply cannot interpret that file.
63.00. 41 There is an error in the toner supplied to the black developer. HP LaserJet Black Developer Unit: 8JM70-67001 (E783xx series) or JC96-11666A (E778xx series}. If the firmware bundle installed on the printer is lower than 4.6.
The drive system the motor drives may be too tight causing an over current state in the motor. Use the feed motor (M101) drive test in the Component test to verify that the motor is not working.
Error 0x0000011B is a common issue on Windows systems and can have various causes. Here are the most common causes and how to resolve them: Driver conflict: This happens when two drivers access the same resources at the same time. To resolve this issue, check for any conflicting drivers and update or disable them.
The HyperText Transfer Protocol (HTTP) 503 Service Unavailable server error response code indicates that the server is not ready to handle the request.
This error has the following causes and solutions: The device you are trying to access either is not online or doesn`t exist. Check power to the device and any cables connecting your computer to the device.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :
Unknown Printer

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :
Unknown Printer

Scanner error keeps coming up
ANSWER : I am having the same problem with my Epson Workforce 645

Read Full Q/A … :
Unknown Printer

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :
Unknown Printer

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :
Unknown Printer

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :
Unknown Printer

Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.

Read Full Q/A … :
Unknown Printer

52.0 SCANNER ERROR
ANSWER : Laser scanner assembly.

Read Full Q/A … :
Unknown Printer