HP Color LaserJet CM6040

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The 58.00. 04 Error occurs when the product experiences a low voltage power supply is when unit malfunctions. Hi, The error msg denotes that “The product has experienced a low voltage power supply unit malfunction.”
A product error has occurred where a memory tag CPU error was detected, or there is a problem with the air sensor or power supply. 58.04 = check low-voltage power supply (ECU) Make sure the line voltage and current source meet the electrical specifications for the product. To resolve problems with the power supply: 1.
59. C0 = Developer motor rotation error. With this printer it usually means the product needs to be replaced. What you can try is to remove all toners and then start up the printer and see if the error appears.
Recommended action. Turn the printer off, wait 15 seconds and turn the printer back on (using the power switch located on the back of the printer). The error code should not appear again.
Error code E04 means that the FINE cartridge in your printer is not installed correctly. To remove the cartridges you will need to push the output tray back in before opening the cover.
If your printer`s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn`t open and the paper isn`t jammed.
The 59.40 is a “fuser rotational error“. Meaning the fuser was unable to rotate causing this error.
The printer is either low in toner, the density is set too low, or the Economode may be turned on. Remove the toner cartridge and shake it. This will redistribute the toner and often will temporarily solve the problem. However, this usually indicates it is time to install a new cartridge.
The 59. F0 Error can be eliminated by resetting the toner and the fuser assembly. You may also try revitalizing your HP device. In addition, you can check for any issue in the fuser motor as well as the internal motor.
This error is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate, the SR9 sensor (the primary transfer roller disengagement sensor) has gone bad or the fuser drive assembly has failed.
Your printer display or status monitor may read “Fatal Error”. This simply means a problem has occurred requiring action to clear.
Wipe the sensor window with one of the cotton swabs provided in the Printer Cleaning Kit, slightly dampened (not soaked) with isopropyl alcohol, to remove dried ink. If the sensor window is heavily coated with dry ink, you may need to apply some pressure while wiping, helping the cotton to absorb the ink.
In Event Viewer dashboard, click Applications and Services Logs –> Microsoft –> Windows –> Print Service –> Operational. Double click Operational. All print events can be viewed here.
The only permanent solution to the 0x0000011B error is to install the latest Windows Update which fixes the issue. For now, you can try uninstalling the update or disabling the problematic security feature from the Registry. Other workarounds include installing the printer manually.
1. Paper Jams. Paper jams are a common problem for printers, resulting in time-consuming and frustrating delays. It can occur when loose sheets of paper get stuck in the rollers or feeding mechanism of the printer.
Why does my printer display – Supply Memory Error? A supply memory error happens when the metal contacts / chip on an HP toner cartridge doesn`t correctly connect with the corresponding contacts inside the printer.
Select Start , then select Settings > Devices > Printers & scanners . Under Printers & scanners, find the printer, select it, and then select Remove device. After removing your printer, add it back by selecting Add a printer or scanner.
You can fix error code 4 in CoD Warzone by ensuring a stable connection. For example, a slow or unstable internet connection can sometimes cause CoD Warzone to crash with error code 4. Slow Wi-Fi, overloaded servers, or several other issues can cause this.
Error code 59.40 for HP Laserjet 4350 means that your printer has a print cartridge motor error. The actions you can do to fix this error are: 1 Turn the printer off and then on. 2 Replace the print cartridge.
The printer was designed to stop and display a 59.4 error if the toner cartridge drive motor should fail or the toner cartridge locks up.
If you see this error code 50.5 on an HP LaserJet 4200, 4240, 4250, 4300, or 4350 series printer, the fuser installed in the printer is registering as an incorrect fuser for that model printer.
This is a main motor startup error. In other words when the motor is supposed to turn it can not and gives the error. I have seen this with other printers and sometimes it is not the motor that is the issue.
The 59.05 errors are related to main motor and toner cartridge. In many cases the drum unit in the cartridge does not rotate and replacing the defective cartridge will resolve the error. You can test the motor by going to diagnostics and running the motor test without a cartridge installed.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HP Color Laserjet 3800 problem when printing color
ANSWER : Do a cold reset

Read Full Q/A … :

HP Color LaserJet CM6040

HP CM2320fxi MFP random color stripes
ANSWER : Had this problem with an HP Color LaserJet 3700dn unit not too long ago. In fact, it was not only doing the random multicolored stripes/bands across the page thing, it was also doing a repetitive palm print-like smudge of black toner on every page. I didn’t want to give up on this printer because on the few occasions in which it printed perfectly, the image quality was stunning and the colors were very impressive.

Read Full Q/A … :

HP Color LaserJet CM6040

Reset HP Color Laserjet 4700 transfer kit
ANSWER : How about the situation when resistor does not reset the transfer belt count and even new transfer belt out of the box is not doing it. Do you have any idea how to solve this problem? I did reset transfer belts and fusing units on several HL 4700 printers with no problem but also I came across few which were not possible to reset even with oryginal parts.

Read Full Q/A … :

HP Color LaserJet CM6040

HP Color Laserjet blank pages – only jetdirect page
ANSWER : What about the engine test? To do that, drop down the front tray. Feel around on the left side at the top and you’ll feel a little plastic dongle. If you lift up on that it will initiate an engine test page. That will be a page containing lines of each color.

Read Full Q/A … :

HP Color LaserJet CM6040

HP Color Laserjet 500 series M551n Error 98.00.0C
ANSWER : I just ran into one of these on a 4 year old m551. Failed to complete startup at the end of disk check. Followed the above link for troubleshooting.

Read Full Q/A … :

HP Color LaserJet CM6040

HELP! HP Color Laserjet 5500dn (formatter prob??)
ANSWER : Italiano:

Read Full Q/A … :

HP Color LaserJet CM6040

HP LaserJet 500 Color MFP M575 Scanner Calibration
ANSWER : 0512 is service code for m575

Read Full Q/A … :

HP Color LaserJet CM6040

My 2550n Color LaserJet does not want to print in color
ANSWER : That model had issues with the carousel solenoid sticking. That might explain why it works after you let it sit for 10 minutes. The solenoid gets hotter with use which causes the deteriorated foam on it to become sticky and hold down the release plate instead of letting it go. This allows the carousel to spin when it is supposed to stop for each color. The solenoid is located on the right side of the printer. If you open the lid, it is just behind the opening at the top right. You need to remove the top of the printer and scrape off the goo on top of the solenoid body. I put a piece of thin sticky backed felt to replace it. Other people use electrical tape.

Read Full Q/A … :

HP Color LaserJet CM6040