Brother HL 8

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Damage or corruption of the printer drivers installed on the system can also cause “Printer not activated, error code 41. Users experiencing this issue need to completely remove the printer drivers installed on the system using the device manager and then reinstall the printer drivers.
Error code 41 usually occurs whenever users attempt to print a document or picture and usually occurs when certain changes are made to Windows. For example, users might have installed the wrong drivers, or the responsible service is not running.
This error has nothing to do with the laser/scanner—it means “unexpected paper size.” The printer measures paper size two ways: The paper cassette has a set of ridges and/or levers usually found on the right side.
Machine Error 41 indicates a mechanical malfunction with Brother machine. It is an indication that there is a problem with the printhead on your machine and the machine requires repair. Often, unplugging the unit from the power source and then plugging it back in again can clear this error message.
The Kernel Power Error 41 may occur due to an underpowered or faulty power supply problem. You need to make sure that your system has sufficient wattage to handle the installed devices appropriately. Additionally, consider acquiring a UPS (Uninterruptible Power Supply) such as a battery backup power supply.
What is Error Code 41? Error Code 41 is a common error message that you might encounter when trying to stream content on the platform. This error code indicates that the content you are trying to stream is not available, often due to surge in traffic to a particular title.
Explanation: The server did not receive any information from the client for too long a period of time.
[Settings]>[All Settings]>[Initial Setup]>[Reset]. to display the type of reset functions, and then press the reset function you want to use. The LCD displays [Machine will reboot after resetting. Press [OK] for 2 seconds to confirm.].
Typically with that error make sure you have updated firmware. If it is and the error persists you may have to reseat the galvo connectors in the machine. If you do this contact them and ask for the proper procedure to prevent dust on the mirrors.
41.3 Paper Size Error. HP`s User Guide for the P4014, P4015 and P4515 printer series says: This is typically caused if two or more sheets stick together in the product or if the tray is not properly adjusted . Reload the tray with the correct paper size.
The 41.2 error in the LaserJet 5Si, 8000, 8100 and 8150 is typically caused by high voltage arcing that disrupts the beam detect circuit. The most common cause of arcing is a bad connection to the transfer roller.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Error Code 51.1 says Printer Error No Kidding.lol
ANSWER : Sometimes turning off and on will allow you to print a few pages. The error is a beam detect error. The only real fix is to replace the laser scanner unit. Could be a loose connector on the scanner or DC controller from the scanner. That’s unlikely. You could try the only other free fix which is to open the scanner assy. and clean all the mirrors inside. The dust could obstruct the laser beam enough to cause the detect error.

Read Full Q/A … :

Brother HL 8

Error Code 52.1M
ANSWER : Magenta laser error. The spinning motor bearings cause the squeal and that slows it down causing the error. You could try opening it and lubricating the motor shift with a drop of synthetic lubricant. Do not use more than a drop.

Read Full Q/A … :

Brother HL 8

Scanner error keeps coming up
ANSWER : I am having the same problem with my Epson Workforce 645

Read Full Q/A … :

Brother HL 8

HP CLJ CP 5225 ERROR 55.0601
ANSWER : my printer cp5225 is giving me error code 55.0601 message which i can’t fix please help

Read Full Q/A … :

Brother HL 8

Error Message 4F on MFC 210C
ANSWER : Basically this kind of error caused by loss of voltage on print head. If this is the case then I suggest to buy a new printer rather than replace print head. Print head might be too costly.

Read Full Q/A … :

Brother HL 8

HP 9040 MFP Error code
ANSWER : bonsoir

Read Full Q/A … :

Brother HL 8

Density Shutter Error
ANSWER : I’ve never worked on one of those printers, but I have never, ever seen 1 valid solution for printer repair on fixya.com I read the replies there when I need a good laugh. Makes me wonder what the “techs” on that forum actually do for a living. It certainly couldn’t be printer repair.

Read Full Q/A … :

Brother HL 8

52.0 SCANNER ERROR
ANSWER : Laser scanner assembly.

Read Full Q/A … :

Brother HL 8