How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
This error can mean that an electrical component is disconnected or is having difficulty communicating with the other components. If you`re getting this error, power cycle your printer by turning it off for one minute and then restarting it.
Hope you are well, usually that error message stands for paper jam inside the printer, please check the rear door, remove the tray 2 and check for paper stuck.
Recommend you to do a hard reset on the printer. (Turn off the printer, disconnect all the cables, wait for a minute, connect the power cord of the printer to wall outlet directly, do not use any surge protector.) Turn the printer On and try to make a copy.
A 13. FF. FF error is related to jams in the paper path. These errors indicate that the product powered up with a jam.
Error 13 typically means there is a network connection issue to the target machines.
This error code indicates that the current user did not have permission to access an operating system file. This error usually occurs if the user does not have read or write permission on a file (e.g. PERSON. RRN) or a directory (e.g. the directory containing .
13 – Paper Jam
If this code appears you have a paper jam, newer models of HP printers will tell you where the jam is located so you can just follow the instructions on the screen to resolve the error code.
The 13. A4. D4 indicates that there is a “paper delay” jam in Tray 4. Which means that paper did not reach SR8 (sensor 8) in the allotted time necessary after the start of paper pickup from Tray 4.
Step 1 – Open MS Excel on your PC. Step 2 – Then, click “File>Open” and select the corrupt Excel file to get started. Step 3 – Click the “Open” drop-down menu and choose “Open and Repair” from the list. Step 4 – Finally, click the “Repair” button to complete the process.
If you see this error code 13.20. 00 “Jam in Top Cover Area” on either an HP LaserJet 4200 or HP LaserJet 4300 series printer, the printer either has a sensor blocked or it has an incorrect model fuser installed.
According to technical documentation this error is usually caused when trying to print on a unit that had either an internal or external finisher and that device has been removed, without replacing the flag assembly that is used for standard output bin.
When a 13. E1. D2 Error appears on the control panel, it indicates there is jam because the paper cannot exit the printer. This might be caused by damage to the output bushing.
The PermissionError: [errno 13] permission denied error occurs when you try to access a file from Python without having the necessary permissions. To fix this error, use the chmod or chown command to change the permissions of the file so that the right user and/or group can access the file.
ERROR 13 – Paper Jam.
Cause: At run time, this error typically indicates that a Variant used in an expression has an incorrect subtype, or a Variant containing an array appears in a Print # statement.
There are several things that could be causing the Linux Error: 13: Permission denied error. Here are some suggestions: 1 – Verify that your listener is running (lsnrctl stat). 3 – Check that “DIRECT_HANDOFF_TTC_listener_name”=ON in listener.
Cmd Error is the story of finding out what happened to you, and why you are the only person left on the planet. Explore and find out what happened as you solve physics and logic puzzles, while keeping yourself out of danger. Build your own maps that you can share on the steam workshop with the in-game map editor.
The error is 13.02. 00 indicating it isn`t reaching the top cover sensor. The paper is getting stuck at the fuser, and the fuser is leaving a very noticeable indentation mark.
The printer experiences a paper jam from Tray 2, or the printer does not pick paper or picks more than one sheet from Tray 2. A 13. B2. D2 paper jam error usually occurs when paper does not leave the paper tray.
Once the printer believes the cartridge has run out of ink you will be presented with either the E13 message or the E16 message that indicates that you need to change the ink cartridge. If this message is being displayed on your printers screen then your printer will stop printing and scanning.
When a 31.13. 13 error appears on the control panel, it indicates that there is a jam in the document feeder because the feeder cover is open. Open then close the document feeder cover. If issue remains, open the document feeder cover.
For example; a 13. A2. D2 indicates that the paper jammed before reaching the tray 2 feed sensor when pulling paper from tray 2. In this case you would look for any jammed paper in or behind tray 2.
Paper has jammed inside the fuser and cannot be removed from the top-cover area or the rear-output area.
13.5 PAPER JAM CHECK REAR DOOR Paper-delay jam at fuser. 1. Check the transfer roller and small media belt to ensure they are operating and can feed print media. 2.