Epson Stylus Color 600

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Push down the release lever to slightly raise the feeder mechanism and release the paper. Then slowly pull the jammed paper out of the feeder mechanism. (Be careful not to pull too hard; the paper may tear, making it more difficult to remove.) If paper is still jammed inside the mechanism, open the cover to remove it.
Make sure your paper meets the specifications for your product. If paper dust builds up on the rollers, they may lose traction and become unable to feed paper properly. Clean the paper guide. If roll paper does not feed, cut the end straight across and uncurl it by rolling it backward, if necessary.
If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. If multiple pages continue to feed at once, turn on the Paper Feed Assist Mode setting in the Setup > System Administration > Printer Settings menu. Do not load more than the recommended number of sheets.
You Cannot Scan Using the ADF

Make sure you have selected either Office Mode or Professional Mode in Epson Scan. See Changing the Scan Mode for instructions. Make sure Auto Detect (Office Mode only) or ADF is selected as the Document Source setting in Epson Scan.

Lift the lever and open the ADF cover. Use a soft, lint-free cloth (microfiber is recommended) moistened with a little water to clean the rollers and the interior of the ADF. Caution: Do not use a dry cloth; you may damage the ADF rollers.
If you have loaded the paper too far into the printer, the printer cannot feed the paper correctly. Turn the printer off and gently remove the paper. Then turn the printer on and reload the paper correctly.
The paper trays are overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper guides are too tight against the paper stack.
If your printouts contain horizontal banding, uneven tint, or stripes, you need to adjust the paper feed. You do this by printing and examining a test pattern, and then selecting the feed adjustments you need.
In the EPSON Scan main window, select ADF-Single-sided or ADF-Double-sided from the Document Source list. Also choose the appropriate settings for scanning. Click Scan. The pages are fed into the scanner and scanned.
Perform a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector. With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
Insert the paper with the printable side up. Place the paper against the left side of the manual feed slot and insert it horizontally. Load one sheet at a time. Open the printer cover and adjust the end of the paper so that it is 1 cm from the roller.
Put a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe against the surface of the rotating feed/eject roller, and wipe horizontally to clean dirt and dust off the whole surface. Make sure that it is wiped properly because black residue on the rollers will affect the feeding performance.
When using the automatic document feeder (ADF) to copy, scan, or fax, the error message `Paper Jam: The original is jammed in the automatic document feeder (ADF). Open the ADF cover, remove and reload the original, and then try again.
In the EPSON Scan main window, select ADF-Single-sided or ADF-Double-sided from the Document Source list. Also choose the appropriate settings for scanning. Click Scan. The pages are fed into the scanner and scanned.
Open the control panel and search for “Scanners and cameras”, then click Vied dcanners and cameras. Select the listed device and press Scan Profiles. Edit the listed profiles and ensure its Source is set to Feeder rather than Flatbed. Conirm the changes and check if you may see any difference.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Workforce 600 continues to bend corner of paper then jam where the sheet passes through the metal platen at the right side of printer.
ANSWER : Everytime that I have seen that happen it was because there was a small scrap of paper in the paper path on the side of the fold. I have dislodged hundred, if not thousands of them by shoving a thin, flexible plastic stick down the paper path. You can also cut a piece of file folder to size and use that. For small scraps of paper, it is usually stiff enough to clear the obstruction.

Read Full Q/A … :

Epson Stylus Color 600

epson workforce 600 won't print black
ANSWER : After 2 brand new Epson ink cartridges and cleaning the print head over a dozen times it FINALLY worked. The print nozzle pattern gradually started getting darker! Pretty much took the entire morning but I’m printing again.

Read Full Q/A … :

Epson Stylus Color 600

Epson Workforce 600 won't clear paper jam message
ANSWER : In my case, I have a WorkForce 7620 having this problem too, and there is white post on a sliding plastic bar which is the reason of my sorrow. I cannot move it, and it is getting me so desperate, because it makes the print head get stuck. I try to push it down to get the print head to the right position. Then, when I turn on the printer, the print head cannot move. The bar post don’t go down to free the print head and all I got all the time is an error code 0x69 on the screen. I see no paper jam there. Any suggestion, please?

Read Full Q/A … :

Epson Stylus Color 600

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Color 600

ADF Problem
ANSWER : I’ve seen that issue thousands of times. There is the big flat bed glass and a long thin one to the left of it. That scans the ADF copies. If there is any dust or “white out” on it, then it will translate into a line since the scanner perceives it that way since the paper is moving past it. Just clean the glass real good and you’ll be OK.

Read Full Q/A … :

Epson Stylus Color 600

Epson 630 close the scanner unit error
ANSWER : how to fix may epson printer

Read Full Q/A … :

Epson Stylus Color 600

EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!

Read Full Q/A … :

Epson Stylus Color 600

? How to reset Epson Stylus Office BX320FW
ANSWER : Nice Tool, my print is not in list but i have use unsupportet Printer, und wirte the reset. And now my Printer working fine!! Big THX

Read Full Q/A … :

Epson Stylus Color 600