Epson Stylus Photo R320
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Ensure that the power cord is correctly plugged into the printer and the electrical outlet. If the power cord is damaged, replace it with a new one. Try to plug the printer into a different outlet to rule out any issues with the outlet. If the power cord and outlet are okay, the next step is to check the power button.
If you have an Ecotank printer, another possible cause of power issues is a faulty motherboard. The motherboard controls the printer`s various functions and may be the reason why the printer won`t turn on. In this case, you may need to replace the motherboard to get your printer working again.
Faulty power cords and connections are an uncommon but possible cause of a printer not turning on. Before suspecting a cord failure, ensure that there is power to the wall outlet and there are no conditions preventing the printer from turning on. Testing by substitution can confirm if a cord connection is the problem.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Select On to wake the printer from sleep mode by tapping the LCD touchscreen or by pressing a button on the control panel. Select Off to wake the printer from sleep mode by only pressing a button on the control panel. This prevents unintentional operations due to objects bumping the LCD touchscreen.
Printer sleep mode
Check that the printer does not have sleep mode enabled: Go to Control Panel > Devices and Printers. Right-click the printer in question, then select Printer Preferences. Look for an option to disable sleep or time-out mode.
The fuse protects your printer from short circuits and power overload. It is placed between the power outlet and the switch on the left side of the printer. If your machine does not start after pressing the power switch, at first you should check if the power cable is connected to a power source.
Turning the power ON/OFF while the print monitor screen is displayed may cause the printer driver to go off-line and make printing impossible. In this case, open the [Printers / Printers and Faxes / Devices and Printers] folder on the computer and check if your printer driver is shown as off-line.
Printer sleep mode
Check that the printer does not have sleep mode enabled: Go to Control Panel > Devices and Printers. Right-click the printer in question, then select Printer Preferences. Look for an option to disable sleep or time-out mode.
Select On to wake the printer from sleep mode by tapping the LCD touchscreen or by pressing a button on the control panel. Select Off to wake the printer from sleep mode by only pressing a button on the control panel. This prevents unintentional operations due to objects bumping the LCD touchscreen.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking
Read Full Q/A … :
Epson Stylus Photo R320
Epson Stylus Photo T60 paper jam
ANSWER : paper jam
Read Full Q/A … :
Epson Stylus Photo R320
Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT
Read Full Q/A … :
Epson Stylus Photo R320
Epson R320 Photo Printer Won't Print Black Ink
ANSWER : Megan !!!! YEAH!!! Mine is a WrokForce 845 and mine are refillables for years. Refilled the BLACK and it quit. 20 nozzle checks later and still nothing so I took a syringe with a piece of fish air tubing. pulled all the 4 cartridges and blew air into all colors, cleaned the contacts and two cleanings and WALLAAA!!! Prints great.
Read Full Q/A … :
Epson Stylus Photo R320
Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.
Read Full Q/A … :
Epson Stylus Photo R320
epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help
Read Full Q/A … :
Epson Stylus Photo R320
Epson R320 says black ink is empty
ANSWER : I have this printer, and while your advice says a refill shop can reset the chip, I was told by a chip -resetter device seller on ebay that this particular printer won’t work with their chip-resetter. Are you sure about this? I am asking and knowing that you won’t send me an email when this is answered since you didn’t ask for an email when I registered. But perhaps I’ll check back
Read Full Q/A … :
Epson Stylus Photo R320
Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16
Read Full Q/A … :
Epson Stylus Photo R320