Epson Stylus Photo R200

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Using the control panel buttons

To turn on the printer, hold down the paper button and the power button . Release the power button first. When the nozzle check starts, release the paper button. The printer prints a nozzle check pattern.

Take a warm damp paper towel or coffee filter and blot the cartridge with the printhead facing down onto the paper towel. This will remove any dried ink on the printhead. Then, hold the cartridge with the printhead facing down against a dry paper towel for 2-3 minutes. A dry paper towel will wick the ink out.
Right-click on the icon for your printer and select Printing Preferences. This will display the Printing Preferences window. Click on the Maintenance (or Utility) tab. Click on Head Cleaning.
Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.
Open the Applications folder, open the EPSON Printer Utility3, select your Epson printer, and click OK. Then select Head Cleaning. 3. Follow the on-screen instructions to start the cleaning cycle, which lasts around 1 minute.
Open the printer driver, click the Maintenance tab, then click the EPSON Status Monitor 3 button. A graphic displays the approximate ink levels. The progress meter appears automatically when you start a print job. You can check the approximate ink levels from this window.
The sponge end of a blocked printer head can be cleaned with only one liquid other than water. This liquid is isopropyl alcohol. Isopropyl alcohol isn`t strong enough to melt the sponge but is still strong enough to dissolve the ink inside the blocked printer head.
If the hot water soak did not unclog the print head, place the cartridge printer head in isopropyl alcohol and allow it to soak overnight. Use a damp paper towel to wipe off the print head area and dry carefully. Try the self-cleaning utility again.
Right-click the printer icon on the taskbar, then select Nozzle Check.
The nozzle cleaning function works by rinsing the spray nozzle with water before and after a wash cycle. The nozzle will oscillate back and forth when the sterilization function is activated, ensuring that the full length of the nozzle is thoroughly cleaned with water.
What Is a Print Head Cleaning? A print head cleaning is exactly what it sounds like; it is simply the process of removing excess ink from the cartridge or printhead to improve the flow. Printhead cleaning is often compared to car maintenance.
Clean the printhead nozzles.

Dampen a microfiber cloth with distilled water. Be sure to use distilled water to prevent any residue from being left behind. Avoid using a paper towel that could leave lint on your printhead. Carefully clean your printhead with the wet cloth to remove dried ink.

Access the Print or Page Setup dialog box. Click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light flashes while the printer performs the cleaning cycle.
Gocolor Head Cleaning Solution Liquid 200 ml for Epson Printer White Ink Cartridge – Gocolor : Flipkart.com.
Turn off the scanner and unplug the AC adapter. Wipe off any dust or dirt on the glass scanning surfaces using a soft, dry cloth. If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner on a soft cloth to remove it. Wipe off all remaining liquid.
On your computer, in the Windows Notification Area (bottom-right corner of your Windows desktop), right-click the printer icon. In the printer menu, select the Properties or Preferences option. In the printer settings window, the ink or toner levels are displayed for the currently-installed cartridge(s).
A method of cleaning ink jet printheads without rendering the printheads inoperative by soaking the printheads in a cleaning solution of acetone and n-methyl-2-pyrolidine, and then flushing the printhead with a gas, such as air.
Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

Soak the Printhead

Fill a bowl with warm water (or a mixture of water and vinegar to clean the printhead) and place the printhead directly in it. Let it sit for five minutes or so. Pull the printhead out of the water and use a lint-free cloth or paper towel to remove the dried ink.

Printheads can be thoroughly cleaned by soaking them in a solution of water and ammonia for several hours and then washing them under warm running water. This method has worked for others, and it`s also cheaper than replacing the printheads.
About 1.1ml ink is consumed for one print head by one normal cleaning. About 0.6ml ink is consumed for one color when put purge button for 4 seconds. About 1.1ml ink is consumed for one print head by one normal cleaning.
If you`re still experiencing quality issues or printhead errors, then there may be other problems at play. Before taking any other actions, it`s recommended that you clean the printhead and ink cartridges four or five more times.
If streaks or white lines appear on your labels, you can clean the print head. Caution: Do not use benzine, paint thinner, or other chemicals to clean the printer.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo R200

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo R200

Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.

Read Full Q/A … :

Epson Stylus Photo R200

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo R200

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson Stylus Photo R200

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo R200

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson Stylus Photo R200

Epson R200 Won't Print with New Cartidges
ANSWER : I have the Epson R200 printer. I have all new cartridges. Thought there was a paper jam but that was not the case. I cannot get it to print or show ink levels

Read Full Q/A … :

Epson Stylus Photo R200