Epson Stylus Photo 960

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

Ink cartridges that have been sitting idle in your machine for more than a couple weeks will eventually dry out. You might be able to bring them back to life by running a cleaning on your machine, but if the pattern continues, you will eventually be placing an order for a set of replacement cartridges.
A clog inside your Epson printer can sometimes trigger the device to send out a wrong “out of paper” warning. But aside from that, it can also cause paper jams as well as more severe internal damages. Thus, it`s essential to examine your printer for signs of foreign material or debris on its rollers.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
The photo tray is overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper width guide is too tight against the paper stack.
Clean the Cartridge Contacts: one of the most common reasons you might get a cartridge problem error when your cartridges are new and full is the contacts on the cartridge might be dirty or otherwise obscured from making good contact with the electronics in the printer head carriage.
The most prevalent reasons for this Epson printer printing blank pages issue include low ink levels in your printer`s ink cartridge, as well as incorrect print settings. As a result, if you wish to resolve the blank page issue with your Epson printer.
Verify the ink cartridge(s) is inserted properly. Some cartridges snap in place, and if they are not inserted fully, the printer won`t print anything. If a lever is moved from its original position to allow for installation of ink cartridges, ensure it is returned to its original position.
Paper jams can occur for a variety of reasons, such as overloading the paper tray, loading different thicknesses of paper in the tray, or using paper that isn`t appropriate for your particular printer. False paper jams can also occur.
Streaks, smears and stripes on your printout are all signs of a bad cartridge, as is a lack of a particular color or a color appearing very faint. Sometimes the printer refuses to print if a cartridge is faulty.
There are chips inside the original cartridges to record how many pages were printed and they cannot be reset. As a result the printer reads the chips and tells you that the cartridges are empty, even though they are not. This is why you are getting the “ink low” message even though the ink tank is at full capacity.
Epson recommends replacing ink cartridges every six months to ensure quality prints (Image source: The Spectraflow).
This is typically caused by an incorrect selection made during the LCD prompting after a cartridge is replaced or the lock release lever did not snap securely over the ink cartridge when installing. Do the following to clear the message: If the LCD displays “No Cartridge”, click here to check how to clear the message.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo 960

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo 960

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo 960

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo 960

Multiple Problems With Epson Stylus Photo R280
ANSWER : I have had my R280 for about 3 years. It has worked fine with generic cartridges for several years now. Last week it indicated I needed to replace one cartridge. I used a generic cartridge from the same manufacturer I had used before. The printer would not accept the new cartridge and now told me that I needed to replace 4 cartridges because it recognized them as non Epson. Surely there is some way to fool the printer so it does not recognize generic cartridges – which have worked well in the past and are still over half full! Anyone got any ideas?

Read Full Q/A … :

Epson Stylus Photo 960

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson Stylus Photo 960

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson Stylus Photo 960

Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.

Read Full Q/A … :

Epson Stylus Photo 960