How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct. Make sure your document does not contain blank pages. If your printer software has a Preview option, you can check for blank pages before you print and remove them, if necessary.
Your Epson printer may have failed to recognize the new ink cartridge, or its ink level system has read it as empty. For numerous Epson printer models, there`s a way to bypass this built-in ink checking system through a quick cartridge reset. Raise the printer`s top cover and then hold the Ink button.
The print head nozzles may need cleaning. The ink cartridges may be old or low on ink, and you may need to replace them. Make sure the paper Type or Media Type setting matches the paper you loaded. Make sure your paper isn`t damaged, old, dirty, or loaded face-down.
Make sure the USB cable is connected securely at both ends and meets the requirements. Run a printer check. If the test page prints, make sure your software is installed correctly. Make sure the printer cover is closed.
1: Check Printer Power, Cables, and Paper
Check that the correct paper is properly loaded into the printer and is not jammed. Replacing damaged cables, plugging in loose or disconnected cables, and fixing paper jams as necessary may resolve the issue.
Check Paper Tray and Printer Connection
Many printer models won`t print if there`s a loose USB connection or if they`re out of ink or paper. Verify your printer`s ink levels, clean the printhead, fill the paper tray, and avoid using substandard paper.
There are numerous possible causes for a printer that`s randomly producing blanks. The most common ones are empty ink cartridges, improper cartridge installation, and congested nozzles. Driver and software issues can sometimes cause this problem as well.
The photo tray is overloaded. The paper is curled. The print side, or shiny side, of the paper is not loaded in the tray face down. The paper width guide is too tight against the paper stack.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
Partial prints are a common issue with printers and there are several main reasons it can occur: Problem with the print spooler (on Windows PCs) Overload of the GPU on later model Macs. Dodgy USB cord.