Epson Stylus Photo 1290

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The Epson Stylus® Photo 1280 inkjet printer is the ideal large-format choice. It creates beautiful 8″ x 10″ prints in as fast as 1 minute 50 seconds¹ and inspiring 13″ x 44″ panoramas faster than ever.
Epson Stylus Series | Single Function Inkjet Printers | Printers | Epson® Official Support.
All cartridges must be installed with ink for printing and printer maintenance. For print quality, some ink remains in replaced cartridges. Designed for EPSON cartridges only: Other brands of ink supplies are not compatible and, if described as compatible, may not function properly or continuously.
You can use plain paper; however, for the best results, you`ll want to use one of Epson`s special inkjet papers. Note: Inkjet transparencies and vellum paper are not supported. You can load one sheet of binder paper with holes on one of the long edges.
In short, no! Printers need specific cartridges to work, which is why we have clear listings across the website for what ink works in any printer. You cannot just use any model/brand cartridge in a printer, even if they look the same.
Epson Stylus NX420 All-in-One Printer (Wireless)
Try connecting the product to another router, access point, switch or hub. Try connecting the product to your router, access point, switch, or hub with another Ethernet cable. Try printing from another computer on the network to see if the problem persists.
4×6 prints are perfect for framed photos, cards and for a physical backup of any of your favorite digital images. 5×7: A slightly larger format than standard 4×6 images, 5×7 prints have a higher aspect ratio than 4×6 prints, so cropping your image to your personal specifications is important!
8.5 x 11 inches.

To get the best results for a photo of this size, use an aspect ratio of 4:3. To achieve a print of this size, resize your image to 3400 x 4400 pixels.

If ink smears when you print on thick paper, you can select the Thick Paper setting to improve print quality. Printing is slower with this setting. Press the home button, if necessary.
Make sure you selected the correct paper size and layout settings in your printing program and printer software. Make sure you selected the correct paper size on the control panel. Make sure your paper is positioned correctly for feeding into the printer. Slide the edge guides against the edges of the paper.
Depending on your region, the default paper size for copies is either A4 (8.3 × 11.7 inches [210 × 297 mm]) or Letter (8.5 × 11 inches [216 × 279 mm]).
This all-in-one delivers vibrant prints up to 13″ x 19″ (through rear-feed tray) and scans up to 8.5″ x 14″ (via the ADF). Print for up to 2 years with each included or replacement ink bottle set2 — each replacement set includes enough ink to print up to 6,000 pages3.
This all-in-one delivers vibrant prints up to 13″ x 19″ (through rear-feed tray) and scans up to 8.5″ x 14″ (via the ADF). Print for up to 2 years with each included or replacement ink bottle set2 — each replacement set includes enough ink to print up to 6,000 pages3.
Epson ET-2800

For paper handling, the printer utilizes a 100-sheet input tray for letter-sized sheets, and the unit`s long-document mode enables the production of media up to 8.5 x 47.2″. Scanning and copying is enabled via the 8.5 x 11.7″ flatbed scanner with an optical resolution of 1200 dpi.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo 1290

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo 1290

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo 1290

Multiple Problems With Epson Stylus Photo R280
ANSWER : I have had my R280 for about 3 years. It has worked fine with generic cartridges for several years now. Last week it indicated I needed to replace one cartridge. I used a generic cartridge from the same manufacturer I had used before. The printer would not accept the new cartridge and now told me that I needed to replace 4 cartridges because it recognized them as non Epson. Surely there is some way to fool the printer so it does not recognize generic cartridges – which have worked well in the past and are still over half full! Anyone got any ideas?

Read Full Q/A … :

Epson Stylus Photo 1290

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo 1290

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson Stylus Photo 1290

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson Stylus Photo 1290

Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.

Read Full Q/A … :

Epson Stylus Photo 1290