Epson Stylus Photo 1280

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

The ink levels may be low and you may need to refill the ink. Visually check the ink levels. Also make sure you filled the tanks with the correct colors of ink. After you print, the colors in your printout need time to set as the ink dries.
There may be several reasons behind the issue, such as empty ink cartridges, Clogged Print Head Nozzles, and Incorrect Print Settings. There may be a fault in the settings of Color Management as well. You can fix it via Running a Nozzle Check or enabling the Print Settings to Color or Replacing the Ink Cartridges.
The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

The yellow nozzle “might” be plugged. Wherever the print nozzles are, carefully wipe them off 2 or 3 times with a paper towel wet with isopropyl alcohol. This Usually dissolves the clog.
Replace any low, empty or faulty ink cartridges on your printer. Dust or paper residue on the rollers or separator pad inside the automatic document feeder (ADF) can result in copy quality issues.
The printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Open the Basic Settings dialog box. Click Advanced, then click More Settings. The following dialog box appears. Choose Color or Black as the Color setting.
Why is my printer printing yellow not red? It is most likely that your image is yellow where you were expecting it to be red and you may also notice that blue parts of the image appear turquoise instead. Both of these effects are caused by a lack of magenta ink/toner on your prints.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo 1280

Epson R320 Photo Printer Won't Print Black Ink
ANSWER : Megan !!!! YEAH!!! Mine is a WrokForce 845 and mine are refillables for years. Refilled the BLACK and it quit. 20 nozzle checks later and still nothing so I took a syringe with a piece of fish air tubing. pulled all the 4 cartridges and blew air into all colors, cleaned the contacts and two cleanings and WALLAAA!!! Prints great.

Read Full Q/A … :

Epson Stylus Photo 1280

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson Stylus Photo 1280

ink error
ANSWER : One uses 807 cartridges, the other uses 811 cartridges. That would be your problem. They’re probably the same cartridge, but use different chips. You can try buying 3rd party chips online. It might work.

Read Full Q/A … :

Epson Stylus Photo 1280

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo 1280

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson Stylus Photo 1280