Epson Stylus Photo 1270

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

if you have all lights flashing and your inkjet Epson printer reporting a possible paper jam or fatal error but there is no paper jammed in the printer maybe the problem is the light sensor first of all look at the waste ink pad counter to make sure the problem isn`t the waste ink pad try to change all ink cartridges …
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state.
When the red H ink light flashes, one or more ink cartridges are low on ink. When the red H ink light stays on, you need to replace the cartridge(s). When you print, you`ll also see a message on your screen telling you which cartridge is low or empty.
If the light and the light flash simultaneously, the printer is in a connection error status. Press the [Wi-Fi] button to clear the error, check the following items, and then perform network setup again. Check that the wireless router is turned on.
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.
When both the red light for your ink and paper out is flashing on your printer, then this error occurs because of a clogged printhead. The movement of the print head is blocked due to any foreign object or jammed paper. Clear it out soon as this will help to resume printing.
A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred.
If you still see white or dark lines or missing colors in your printouts, even after cleaning the print head several times, you can perform a Power Ink Flushing. Note: After a Power Ink Flushing, you must turn off the product and wait at least 12 hours before printing again.
Some of the causes of a blinking light on your router include outdated firmware, damaged cables, faulty components, or network outages. Restarting or resetting your router often solves these networking issues but you can also update the firmware or contact customer support.
Whatever your Wi-Fi light is labeled, a green light indicates that your router is broadcasting a Wi-Fi signal throughout your home so you can wirelessly connect your devices. A flickering light is fine, and it means your network is active.
The Wi-Fi lights are usually flashing rapidly when your Wi-Fi is in use. If you don`t have any wireless devices connected to your Wi-Fi network, these lights may be off. Some routers or gateways may also show a solid green or white Wi-Fi light, which indicates that the Wi-Fi is functional.
Unplug and restart your printer

Sometimes power cycling your printer can resolve the issue. Turn off your printer and unplug it, wait 30 seconds, plug your printer back in, and then turn the printer back on.

Do a hard reset on your printer. To do this you just need to turn off your printer, unplug for a few minutes and then plug the printer again. If that still doesn`t work, try turning the printer and your computer off, and then start it back up again. Try uninstalling and then reinstalling your printer driver.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
This occurs when the printer loses the Wi-Fi connection or there is a connection error during setup. If this happens during first-time setup, press and hold the Wireless button on the back of the printer for five seconds to reset the wireless connection.
The Wireless light blinks when the printer is attempting to connect to the wireless router or access point. Wait a few minutes, and then check the light again. If the Wireless light is on and steady, the printer is connected and you can stop troubleshooting.
If you wait several minutes and it continues to blink, turn the printer off, then back on. If it will not turn off, unplug the power cord from the back of the printer. Unplug the power cord from the power source. Wait 30 seconds, then plug the power cord back into the power source.
Power down the printer and then unplug the power cord from the printer and the wall. Wait for a minute, then plug the printer back in. The printer will reset and turn on.
The operating current for the machine while printing is approximately 3.8 amps. When the machine is warming up it may peak. This peak enables the machine to print the first page quickly. Sometimes this warm-up peaking will cause lights to flicker as the power is drawn.
Eight flashes:Ink absorber is almost full

The ink absorber is almost full. Press the printer`s RESUME/CANCEL button to continue printing. Contact the service center.

If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
Print blemishes after inserting a new cartridge. Slow print times. Abnormal noises. Paper jams and ripped paper.
Over time, the ink residue dries up and blocks the nozzle of print head due to which low-quality print or dark lines appears across the documents you print. Therefore power flushing the print heads can clear the clogs from the nozzle of the print head and restore proper ink flow.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Photo 1270

Epson R2400 flashing top two lights.
ANSWER : right..i had thisroblem and have fixed it..take rear cover off .looking from back..there is a small black sensor that had come loose.. reafix..and all working good

Read Full Q/A … :

Epson Stylus Photo 1270

epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help

Read Full Q/A … :

Epson Stylus Photo 1270

Epson Stylus Photo RX600, porous pad
ANSWER : Hi, You may have by now (Feb.2016 ) solved your problem, if not I have just used to code to reset my copy counter but as yet have not replaced the surplus ink pad tanks, what I am going to do is install an external surplus ink tank to bypass the pads as I am a bit nervous of taking my printer apart, Go to ebay and type in “RX600 surplus external ink tank” cost is well worth it, Happyhammer 20.02.16

Read Full Q/A … :

Epson Stylus Photo 1270

Epson stylus photo R300
ANSWER : Had the same problem with the VM cartridge, I cleaned and put it back several times not luck,then the MK started acting up as well, cleaned it and put it back and worked, the VM however was still acting up. I turned the printer off and took out the VM and put it back without cleaning, turned on the printer and the VM is working now….come on Epson what the hell is wrong with this system.

Read Full Q/A … :

Epson Stylus Photo 1270