Epson Stylus Color 600

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If your printouts have incorrect colors, try these solutions: Make sure the paper type setting matches the paper you loaded. Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged.
2 Answers. The yellow nozzle “might” be plugged. Wherever the print nozzles are, carefully wipe them off 2 or 3 times with a paper towel wet with isopropyl alcohol. This Usually dissolves the clog.
If the cartridge is in the wrong position the tube will fill with the wrong color. To resolve this issue you will need to clean the print head. It may require 10 to 15 cleanings to clean the ink tubes and print head. During the cleaning process, the ink in the cartridge(s) will be consumed.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
Reasons for Epson printer will not print from computer

Not properly connected to the electrical supply. Not set as a default printer. Low ink levels. Jammed paper.

Replace any low, empty or faulty ink cartridges on your printer. Dust or paper residue on the rollers or separator pad inside the automatic document feeder (ADF) can result in copy quality issues.
Missing colours, streaky prints, smudges and ink blotches are all signs that your printer ink or toner cartridge may be damaged. Some printers will actually warn you if a cartridge is damaged and will refuse to print. This includes HP ink cartridges, Samsung toner cartridges and Canon ink cartridges.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
For Windows Users

Click the Screen Calibration Utility icon button. The Screen Calibration dialog box appears. Move the slider to the right or left until the two shades of the gray horizontal stripes match. Click OK when you have finished calibrating your scanner and monitor.

Epson Printer Errors

If your printer is displaying an error code or message on the control panel, search for `Error code` on your product`s FAQs tab.

For Windows Users

Click the Screen Calibration Utility icon button. The Screen Calibration dialog box appears. Move the slider to the right or left until the two shades of the gray horizontal stripes match. Click OK when you have finished calibrating your scanner and monitor.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

epson workforce 600 won't print black
ANSWER : After 2 brand new Epson ink cartridges and cleaning the print head over a dozen times it FINALLY worked. The print nozzle pattern gradually started getting darker! Pretty much took the entire morning but I’m printing again.

Read Full Q/A … :

Epson Stylus Color 600

Epson Stylus Color 3000
ANSWER : Hi i’ve a problem with my espon 3000… i’ve didn’t use it for a while (maybe 3 years) and now i bought new compatible cartridge but the printer doesn’t print anything… maybe the printhead is blocked or anything else.. can you help me?

Read Full Q/A … :

Epson Stylus Color 600

Epson Workforce 600 won't clear paper jam message
ANSWER : In my case, I have a WorkForce 7620 having this problem too, and there is white post on a sliding plastic bar which is the reason of my sorrow. I cannot move it, and it is getting me so desperate, because it makes the print head get stuck. I try to push it down to get the print head to the right position. Then, when I turn on the printer, the print head cannot move. The bar post don’t go down to free the print head and all I got all the time is an error code 0x69 on the screen. I see no paper jam there. Any suggestion, please?

Read Full Q/A … :

Epson Stylus Color 600

Epson Color Stylus 740
ANSWER : Moe

Read Full Q/A … :

Epson Stylus Color 600

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus Color 600

Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking

Read Full Q/A … :

Epson Stylus Color 600

Epson Stylus Photo T60 paper jam
ANSWER : paper jam

Read Full Q/A … :

Epson Stylus Color 600

Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT

Read Full Q/A … :

Epson Stylus Color 600