How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
The Cause of Clogs
Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.
First, check your printer settings on the file or picture your trying to print. If your page is setup to print in “grayscale” it will only print in black and white. Change the setting to “default” so it will print in color. If your settings look good from the start, the cartridge may just need to be primed.
Select Print Settings from the pop-up menu. Select plain papers or Envelope as the Media Type setting. Select the Grayscale check box. Click Print to close the Print dialog box.
The ink cartridges may be old or low on ink, and you may need to replace them. Your printed colors can never exactly match your on-screen colors. However, you can use a color management system to get as close as possible. Try using the color management options in your printer software.
Customizing print settings
Click Advanced, then click More Settings. The following dialog box appears. Choose Color or Black as the Color setting.
Reasons for Epson printer will not print from computer
Jammed paper. Ink cartridge issue. No paper is installed. Outdated printer driver.
Make sure your printer is on. Check if the cable is properly connected from the computer to your Epson printer. If you are using wifi, check if the devices are connected to the same network. Check for ink levels or paper jams.
Clean the printheads: Sometimes the issue why you are unable to print in color is because our printheads are clogged with ink. Clean the printheads and then print a document to check if color printing works. Some printers also have in-built programs that can clean themselves so remember to check for that.
There`s a trick to printing in color: You must select the color printer in the print menu AND make sure the document is set to print in color under “Printer Properties.” (Most of the time, the color printers default to “color” as the output).
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
You can visually inspect the remaining cartridge levels on your printer. If they are full but you still cannot print properly, check the cartridge`s expiry date. Expired ink cartridges often dry up which causes problems in the print results.