Epson Stylus C90
Experienced technical support provide their insights in answering this question :
It looks like General Error occurs. Check for foreign objects inside the printer which may block the movement of printhead carriage, paper feed, etc.
How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
Ink in a cartridge is low. You can continue printing, or check which cartridge is low and replace it.
Most probably there is jammed paper inside the printer. There may be no papers in the paper tray. Having no connection could also lead to Printer Blinking Lights Error.
Some parts of the printer are broken, or there`s an internal error with the device. You need to restart your printer if you notice the `Resume` light and the Power light blinking together. There`s an improper connection. A flashing `Resume` light can also indicate a paper jam.
When the red H ink light flashes, one or more ink cartridges are low on ink. When the red H ink light stays on, you need to replace the cartridge(s). When you print, you`ll also see a message on your screen telling you which cartridge is low or empty.
A blue or green light indicates the printer is operating correctly, while a red light indicates an error has occurred. A system error has occurred.
– Make sure that none of the ink cartridges are empty. If the cyan or yellow run out, you`ll get a definite red/pink hue to the printouts. – Verify that the paper type setting in whatever application you`re using, matches the paper type you`re using.
If the error light is flashing, you cannot clean the print head. Replace the appropriate ink cartridge first. Right-click the printer icon on the taskbar, then select Head Cleaning. Or access the printer software, then click the Utility tab and click the Head Cleaning button.
The Power light blinks at a steady interval when the printer is processing a print job. If the Power light blinks fast, the ink cartridge door might be open, or the printer might be in an error state. If an error message displays on the computer screen, follow the on-screen messages to resolve the issue.
The Wireless light blinks when the printer is attempting to connect to the wireless router or access point. Wait a few minutes, and then check the light again. If the Wireless light is on and steady, the printer is connected and you can stop troubleshooting.
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Red ink light flashes One of the cartridges is low on ink. Check the message that appears on your screen to determine which cartridge is low. Make sure you have a replacement cartridge. Red ink light is on One of the cartridges is out of ink or not installed.
Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects.
If your Epson printer is printing out faint images, skipping lines, or is streaking your image with lines, chances are you have a clogged nozzle–a common problem many users have with Epson printers. It`s unavoidable that print heads clog over time as small amounts of ink residue dry up and collect in the nozzles.
Reasons for Epson printer will not print from computer
Not properly connected to the electrical supply. Not set as a default printer. Low ink levels. Jammed paper.
Ink and paper lights blinking alternately means that your internal “waste ink pads” are full and need resetting/cleaning out. Check your Epson Status Monitor (on PC) for any error messages – if it says “service required” or “… end of service life” then it`s the waste pads.
1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”
Yes, you can reset the print settings to their original, default values. Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings.
Paper may be jammed in the product. Remove any jammed paper, and press the cancel button to clear the error. If the lights still flash, there may be a product error. Turn the product off, check inside for jammed paper or foreign objects, then turn the product back on.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Epson Stylus C90 (Red Light Continuously Blinks)
ANSWER : It looks like General Error occurs. Check for foreign objects inside the printer which may block the movement of printhead carriage, paper feed, etc.
Read Full Q/A … :
Epson Stylus C90
Epson Stylus Photo R230 – flashing red lights fix
ANSWER : REDLIGHT
Read Full Q/A … :
Epson Stylus C90
Epson Stylus Photo R230(2 red indicator blinking)
ANSWER : 2 red indicator blinking
Read Full Q/A … :
Epson Stylus C90
Epson Stylus Photo R200 – flashing red lights
ANSWER : The R800 will flash the ink and paper lights alternately when the ink pads are assumed to be full from extensive head cleaning. Sometimes, if not always, the head will lock into place on the right side above the ink head cleaning sponges that release ink to the lower ink pads.To correct the problem you need to clean the sponge area, I use cotton swabs. If the head is locked to need to release the carriage lock with a screwdriver. This will require removing the cover, but not necessarily the bottom of the unit.There is a 179 page service manual available for download for $16.50. There are free downloads of this manual, but usually are missing the 100 pages.You can remove the cover by:1. Remove the three screws on the rear housing (One to the left of the power plug, one on the opposite side and one in the lower middle bottom.2. Remove the three screws inside the upper housing (Just under the lid where the hinge is).3. Remove the screw under the left and right side in back below the vents.4. In the back pull the white ribbon closest to you out of the block, do not try to remove the block itself.5. Place a screwdriver into the slot both on the right and lift of the bottom corners on the back to release the hooks that hold the upper unit.6. Lastly, put a screwdriver into the notches on the bottom of the printer located in the front right and left, they are spring loaded.7. Remove cover.8. The head lock release screw is in the right side of the printer and is partially covered by the lower housing. I drilled a half inch hole into the side as to be able to insert a screwdriver. Turn the screw to the left and the head will rise out of the locked position. You only need to turn enough to release the head.9. Clean the sponges and any areas you see with excess ink.10. Place the cover on the unit enough to plug the white ribbon back in and turn the unit on.If the printer lights stop flashing then you are all set.
Read Full Q/A … :
Epson Stylus C90
Epson Stylus Photo T60 paper jam
ANSWER : paper jam
Read Full Q/A … :
Epson Stylus C90
epson stylus photo 2000p problems
ANSWER : plz i just receive epson stylus photo 2000p from a friend and the ink light are on nothing is working plz help
Read Full Q/A … :
Epson Stylus C90
Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.
Read Full Q/A … :
Epson Stylus C90
Epson Stylus PX810FW
ANSWER : You could have air in the tubing/print head.
Read Full Q/A … :
Epson Stylus C90