Epson FX 85

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If the nozzle check page does not print satisfactorily, you may need to repeat the head cleaning and print the nozzle check pattern again. If print quality hasn`t improved after repeating this procedure four or five times, turn the printer off and leave it alone overnight.
Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before printing a nozzle check pattern and running another Power Cleaning or Print Head Cleaning.
If print quality has not improved after running Power Cleaning, wait for at least 12 hours without printing, and then print the nozzle check pattern again. Run Print Head Cleaning or Power Cleaning again depending on the printed pattern.
The Cause of Clogs

Printheads clog because nozzles get blocked by either air or ink. Clogs usually happen when: You keep printing with depleted ink cartridges. Using empty ink cartridges can result in air bubbles that can clog your cartridge and/or printhead.

Dried Ink Buildup on the Printhead

If the print cleaning cycle doesn`t work, dried ink may be the culprit. Take the printhead out and wipe the nozzles clean to remove any buildup. Depending on the model of your printer, this may be difficult—some printheads are harder to remove than others.

Flush the Ink

Your printer may have dried ink particles on the nozzles. If you are wondering how to fix Epson printer not printing color, the answer for you is to flush the ink.

You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.
In the majority of cases, printers` self-cleaning mechanisms clean blocked printer heads by flushing the nozzles with air. The air works to dislodge dry ink inside the cartridge channels and also push it out. The intensity of the self-cleaning process of printers is usually not very strong.
If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning. If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12 hours before running another Power Cleaning.
Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Check the following: Make sure the product is placed on a flat, stable surface that extends beyond the base in all directions. The product won`t operate properly if it`s tilted or at an angle.
When you fill a cartridge, the ink sometimes doesn`t make it all the way to the bottom of the reservoir. Fix this problem by removing the cartridge and injecting more ink into the sponge through the exit hole. Air bubbles also can get trapped inside the cartridge, blocking ink flow.
Reasons for Epson printer will not print from computer

Jammed paper. Ink cartridge issue. No paper is installed. Outdated printer driver.

Run a nozzle check to confirm that the print head is clean. You may need to clean the print head up to 4 times. You can also turn off your Epson printer and wait at least 6 hours. Then try printing again.
Another way to tell that your print heads are dirty is if your print jobs come out partially printed or streaky. If your printer display says that you`re low on ink but you have a full cartridge, this may also be a sign of a dirty printhead.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson FX 85

black will not print after cleaning the nozzle head 5 times
ANSWER : There’s way to clear your print head. Go to Youtube site of Jose Rodriquez. He’s got a video on just about every aspect of printing. Put something like a folded shop towel, spray it with Windex, no deodorants etc. just the original Windex, no ammonia D, and some alcohol (not rubbing alcohol but 90 percent or some such). Fold towel into a strip about and inch and a half or so and put it in the cup like trough that the print head follows when printing. Start printer. Let printer just begin. When head moves out of the dock, and unplug the printer. Now you can move head manually. Maneuver head over the towel. Leave it overnight. You may need to do this many times. I had about given up when my print head cleared up. I think you need to see Jose’s video, then you’ll understand better. If you can’t find it or you need more help, feel free to email me. There are other resources, but I wouldn’t go for commercial cleaning kits. That’s just me. And I’m leery of trying to put pressure through the head. I hope this helps. It’s kind of brief. There is a man I found who had written almost a book on the subject. He’s not anxious for his name to be given out however.

Read Full Q/A … :

Epson FX 85

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson FX 85

What fluid to clean epson head?
ANSWER : There’s only 1 left, so better hurry. http://www.rjettek.com/jiecr-ocp-rinse-epson-blue/

Read Full Q/A … :

Epson FX 85

Epson Stylus Pro 9000 print head problems
ANSWER : Shot in the wind. I have an Epson 9000 Stylus Pro. Have had it for a long time and take extremely good care of it. I run maybe a dozen or two 2X3 posters a year on it. I am very careful about dust and clean the machine often.

Read Full Q/A … :

Epson FX 85

EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!

Read Full Q/A … :

Epson FX 85

print head out of aligment
ANSWER : It seems as though the carriage is not moving smoothly. Make sure there are no obstructions and that the carriage rail is lubricated. Use a non gumming oil such as sewing machine oil. Do not over lubricate. Hope this helps. If you are in the Los Angeles area contact us directly at printerrepairpros.com. Hope this helps.

Read Full Q/A … :

Epson FX 85

can't align print head horizontally despite running program
ANSWER : Don’t call that number, it’s a phishing scam number as far as I can tell. Last thing you want to do is have them remote into your computer (they may try hacking you in the background to try & steal bank info/saved passwords) or give them a CC number for tech help since they are not directly affiliated with Epson. As far as Epson’s site shows there is no toll free tech line, only 2 800s listed on their site and 1 is presales other is for supply orders.

Read Full Q/A … :

Epson FX 85