Epson Stylus Photo R320

How to Identify and Fix Common Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced technical support :

If your printouts have incorrect colors, try these solutions: Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary.
Your magenta color is running low, resulting in the print appearing green (cyan and yellow) rather than gray (cyan, magenta and yellow). You can replace the color cartridge, or (perhaps better for your case) go to the driver settings and select “Print in Grayscale” and “Black ink only”.
Prints that appear more green are commonly caused by an absence of magenta ink/toner being put to paper by your printer. In addition to your prints looking “greener” you may also notice yellow and blue areas appear almost neon due to the the magenta not being able to give them more realistic tones.
Ink Cartridge Settings

The cyan and yellow ink cartridges work together to create green in prints. As there isn`t a dedicated green cartridge, you must disable either yellow or cyan to reduce green. After clicking on the “Ink Cartridge Settings” button, you can deselect the “Cyan” or “Yellow” ink cartridge.

A damaged or worn OPC may cause toner powder unable to adhere to magnetic roller correctly, hence, toner powder may fall on the print-out and causing background issues.
It is perfectly normal for a print from a sublimation printer to look different to the image on your computer screen. This is because sublimation inks change colour during the sublimation heat pressing process. As sublimation ink reacts when it is heated the ink will physically change colour.
From the File menu, select Print. For Windows users, select the target printer, and then click Properties. Select Custom as the Mode setting, and then click the Advanced button. Select Off (No Color Adjustment) as the Printer Color Management setting.
You can fix the “Epson printer not printing black” ink issue by cleaning its printhead using the distilled water, and sponges. The printhead of the printer can also be cleaned by running a cleaning cycle on your printer.
If your PC or the LCD screen on your printer is telling you that your ink cartridges are full but no ink is passing through to the paper, then it`s most likely that you are dealing with a clogged printhead. Blurry documents and images that appear faded are also signs that it`s time to remove the excess ink.
You can fix the “Epson printer not printing black” ink issue by cleaning its printhead using the distilled water, and sponges. The printhead of the printer can also be cleaned by running a cleaning cycle on your printer.
From the File menu, select Print. For Windows users, select the target printer, and then click Properties. Select Custom as the Mode setting, and then click the Advanced button. Select Off (No Color Adjustment) as the Printer Color Management setting.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Epson R320 Photo Printer Won't Print Black Ink
ANSWER : Megan !!!! YEAH!!! Mine is a WrokForce 845 and mine are refillables for years. Refilled the BLACK and it quit. 20 nozzle checks later and still nothing so I took a syringe with a piece of fish air tubing. pulled all the 4 cartridges and blew air into all colors, cleaned the contacts and two cleanings and WALLAAA!!! Prints great.

Read Full Q/A … :

Epson Stylus Photo R320

Epson R320 says black ink is empty
ANSWER : I have this printer, and while your advice says a refill shop can reset the chip, I was told by a chip -resetter device seller on ebay that this particular printer won’t work with their chip-resetter. Are you sure about this? I am asking and knowing that you won’t send me an email when this is answered since you didn’t ask for an email when I registered. But perhaps I’ll check back

Read Full Q/A … :

Epson Stylus Photo R320

Epson C900 print shifted down page
ANSWER : I found Healthup’s description to be really helpful in locating SS2, 3 & 5. I do want to add that you need to remove the M1 motor in order to get the secondary transfer roller assembly out of the chassis.

Read Full Q/A … :

Epson Stylus Photo R320

Need help for Epson Stylus color 3000 print head?
ANSWER : I need help changing the print head in my Epson 3000 – I have 2 printers – one will not stay in alignment and the other black ink is plugged and I have soaked it and cannot get it to budge.

Read Full Q/A … :

Epson Stylus Photo R320

Paper feeds straight through without printing on an Epson R2400
ANSWER : I was able to get it to print the internal test page by holding down the sheet paper feed button while turning the machine on — then continuing to hold the sheet paper feed button. It took several attempts, feeding a page straight through, but eventually it caught the sheet and printed. So it may be a timing issue as others have mentioned. It could still mean that the feed rollers are worn out. The back side of the large D-shaped feed roller has visible abrasion on it. The abrasion is difficult to see as the roller does not stay with the flat side exposed.

Read Full Q/A … :

Epson Stylus Photo R320

Epson Artisan 835 print head cleaning question
ANSWER : I had the same problem. After reading the comments, I tried Liquid Wrench spray. 1st try got about sixty percent improvement. Tried again this time I let it set for about 10 min then did a head cleaning. Completely solved the problem. I am a little concerned about its use on plastic. So far so good.

Read Full Q/A … :

Epson Stylus Photo R320

Epson TM-U220 no test printing, troubleshoot nada
ANSWER : My TM U220 also not printing, it appears that windows do not recognise it. The internal test sugested above does not work either. Any suggestion would be welcome.

Read Full Q/A … :

Epson Stylus Photo R320

EPSON Stylus NX400 Vista Print Problem
ANSWER : I have the similar issue. The browse button would not open the connection listing the shared printer. How can I fix it? Please respond to this post or contact me via buy essays. Thank you in advance!

Read Full Q/A … :

Epson Stylus Photo R320