How to Identify and Fix Common Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced technical support :
In the program window that opens, click the “Particular Adjustment Mode” button. Leave the menu on “Auto-Selection” and click “OK” In the main menu, scroll down to maintenance section. Highlight “Waste Ink Pad Counter” and click OK. Click the “Initialization” button.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
What is a “Waste Ink Counter” A waste ink counter resides in the printers firmware (non-volatile memory) and consists of an ambiguous value that the printer will increment over time with each operation that generates waste ink.
There are a number of porous pads in the printer that collect, distribute, and contain ink that is not used on printed pages. Ink is collected by these pads during the initial setup of the product, during cleaning cycles, and when printing borderless photographs.
Press and hold down the Cancel button for 3 seconds. When the message to reset the printer to default settings appears, press OK to reset the print settings. Note: This reset does not affect LCD contrast, Print Confirmation, or PictureMate Print Wizard settings.
Just above the circuit board on most printer cartridges, you`ll find a small button. You`ve seen these tiny buttons before on cell phones, phone chargers, etc. This is your reset button, and the only way to get in there is either with a paper clip or the tip of a pen (which will leave a tiny ink smudge on the button).
Press the up or down arrow button to select Setup > Maintenance > Reset Ink Levels.
Ideally, you should recycle them as soon as they`ve been used, as this stops the ink residue left inside the cartridge from drying out, making them easier to clean. The cartridges can then be refilled, re-sold and reused.
Using the reset feature is a common need to clear a jam, clear a queue or to work through a different set of troubleshooting issues. Not all models have a reset button, but they all have a process to reset the printer.
11 ink cartridges per second and 1 million cartridges per day are thrown away. That`s a waste we should stop.
While ink can be burned or landfilled, it can also be recycled. Waste ink usually falls under one of two categories: uncontaminated and contaminated. Uncontaminated ink describes ink that has not been used in a press fountain. This ink can be recycled, but it`s usually cheaper to reuse it.
Why is so much ink being wasted? Whenever you power up your printer, it goes through a maintenance and cleaning cycle which uses ink. That`s what`s happening when the printer head moves back and forth after your turn it on. This intermittent use can burn through more than half the ink in the cartridge.
A waste tank is whenever the printer does self-cleaning, it dunks some waste ink into a waste pad. Therefore if you do lots of cleaning, the waste tank will be full. You can look at the printer`s right back corner; there`s a screw secure the cover.
High Quality Material: Our Waste Ink pad is made of high quality plastic and sponge material. Easy Installation: This Printer Waste Ink Pad is very easy to install and hence need to not need any kind of demonstration.
Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.
Make sure that the printer is turned on and the ink out light is off. Access the Print or Page Setup dialog box and click the Utility icon button, then click the Head Cleaning button. Follow the on-screen instructions. The power light and the ink lights flash while the printer performs the cleaning cycle.
Using a Paperclip You can use a paper clip to reset your Epson cartridge chip if there`s a single pinhole on the small green microchip on the bottom or side of the cartridge. If there are two round metal contacts at the top or bottom of the chip, you`ll actually need two paperclips.
A resetter is a small plastic tool that physically connects with the printer cartridge chip and tells the chip to reset its memory.
Epson Printer Errors
If your printer is displaying an error code or message on the control panel, search for `Error code` on your product`s FAQs tab.
The difference between leaving your printer on or turning it off is generally insignificant in terms of energy costs. For healthier print heads and more efficient ink consumption, however, it`s better to leave your printer on.
The reset key is a single use key and once used cannot be used again. All EPSON printers have inbuilt counters that count up the number of pages a printer produces, the number of head cleans executed and various other attributes. Once a critical level is reached the printer will enter its service mode.
This error occurs if the firmware update procedure is interrupted, e.g. an accidental powering off of the product, cables being removed, or the installation being canceled. To recover from this error, Epson will instruct customers to update their printers with the latest version of the firmware.
On resetting a scanner, it discards all of its explicit state information which may have been changed by invocations of useDelimiter(java.